Справочник Пользователя для Mitsubishi Electronics A951GOT

2.4 Software Packages to be Used

2 - 9

1

OV

E

R

VI

EW

2

3

PERFORMA

N

CE

4

NAMES

 OF

 

THE P

A

R

T

S A

ND 

THEIR SE

TTI

N

GS

5

ROUGH 

PRE-

OPE

R

A

T

IO

N 

PROC

E

DUR

E

6

HANDLING

7

MAINTENANCE AND 

INS

P

E

CT

IO

N

8

E

M

C DIRECTIV

E

*1 The printer of ESC/P raster specifications such as the PM series cannot be connected and used with the GOT.
*2 The RS-422/RS-232C cable for use between GOT and computer link module should be fabricated on the user side 

by referring to the [GOT-A900 Series User's Manual (Connection System Manual)].

*3 The RS-232C cable may be fabricated by the user.

The RS-232C cable can also be fabricated by the user.
Refer to the following manual for details of the cable specifications.
When GT Designer is used: GT Works Version  /GT Designer Version   Reference Manual
When GT Designer2 is used: GT Designer2 Version   Operating Manual

*4 The printer cable may be fabricated by the user.

Refer to [A9GT-50PRF type Printer interface module User’s Manual] for full information on the specifications 
needed to fabricate the cable.

*5 For the A9GT-QJ71LP23 and A9GT-QJ71BR13, the device range (QCPU, QnACPU, ACPU) that can be monitored 

changes depending on the communication driver.
When the A7GT-J71LP23 or A7GT-J71BR13 is mounted, only the device range of the AnA can be monitored.

*6 Relevant document  Some devices have been concluded to be applicable for GOT900 series by Mitsubishi.

For details of the devices, refer to the relevant document "List of valid devices applicable for GOT900 series " 
(Technical bulletin T10-0028).
Please contact your local Mitsubishi representative for the document, if necessary.
The GOT may not operate correctly if a device other than described in the document is used.

*7 The A8GT-C100EXSS-1, A8GT-C200EXSS-1, and A8GT-C300EXSS-1 are composed of the A8GT-EXCNB (0.5m) 

and the 
A8GT-C100BS (10m), A8GT-C200BS (20m), and A8GT-C300BS (30m) respectively.
When calculating the cable length, the A8GT-EXCNB‘s cable length can be ignored.

2.4 Software Packages to be Used

When a GOT is used, a software package of the applicable version or later is required.
The versions of the software packages required for each GOT are shown below.

RS-422 cable

AC30R4-25P

Cable length 3m (D-sub 25-pin at both ends)

For connection between GOT and A/
QnACPU
For connection between GOT and FXCPU

AC100R4-25P

Cable length 10m (D-sub 25-pin at both ends)

AC300R4-25P

Cable length 30m (D-sub 25-pin at both ends)

---

For connection between GOT and computer link module *

2

RS-232C cable *

3

QC30R2

Cable length 3m

For connection between GOT and QCPU

AC30R2-9P

Cable length 3m (D-sub 9-pin, D-sub 25-pin)

For connection between GOT and personal 
computer for data transfer

AC30R2-9SS

Cable length 3m (D-sub 9-pin at both ends)

AC30R2

Cable length 3m (D-sub 25-pin at both ends)

For connection between GOT and personal 
computer for data transfer
(9-pin conversion connector required)

AC30N2A

Cable length 3m (D-sub 25-pin at both ends)

---

For connection between GOT and computer link module *

2

---

For connecting the GOT with the power supply unit of the bar code reader *

4

Printer cable *4

AC30PIO-20P

Cable length 3m

For connection between GOT and printer

GT Designer

---

Screen creation software for GOT900 series

GT Designer 2

---

Component

Type

Description