Справочник Пользователя для Mitsubishi Electronics A951GOT
6 - 24
6.8 Printer Interface Module
6.8.1 Printer interface module type
6.8.1 Printer interface module type
6.8 Printer Interface Module
The printer interface module is connected to the GOT when the printer is used with the GOT.
The printer is used to print the data and others of the alarm history and hard copy functions.
Refer to the following manual for details of the corresponding functions.
The printer is used to print the data and others of the alarm history and hard copy functions.
Refer to the following manual for details of the corresponding functions.
• When GT Designer is used
: Help function of GT Designer
• When GT Designer2 is used : GT Designer2 Version Reference Manual
6.8.1
Printer interface module type
The following printer interface module type is available.
6.8.2
How to connect the printer interface module
• For details of the printer interface module specifications, refer to the A9GT-50PRF type printer
interface module User's Manual.
Type
Description
A9GT-50PRF
Printer interface module
1) Thread A9GT-50PRF mounting screw holes in the control
box or the like. (2- 3.5 mounting holes)
The A9GT-50PRF's GOT connection cable is 50cm long.
Install the A9GT-50PRF within this distance so that the
GOT-end connector of the cable may be fitted into the
GOT's connector.
When mounting the A9GT-50PRF on the back of control
box door, exercise care to avoid screw holes passing
through the control box surface.
The A9GT-50PRF's GOT connection cable is 50cm long.
Install the A9GT-50PRF within this distance so that the
GOT-end connector of the cable may be fitted into the
GOT's connector.
When mounting the A9GT-50PRF on the back of control
box door, exercise care to avoid screw holes passing
through the control box surface.
2) Tighten the mounting screw to the specified torque range
39 to 59N cm.
3) Plug the GOT side connector of the A9GT-50PRF to the
option unit at the bottom of the GOT.
For A95 GOT
For A956WGOT