Справочник Пользователя для ONKYO 9555
13
Connecting the A-9755/A-9555—Continued
Connecting a Preamp (A-9755 only)
The A-9755 can be used as a power amplifier with a
separate preamp.
In this case, use an analog audio cable to connect the
A-9755’s MAIN IN jacks to the preamp’s output jacks.
Connect the speakers to the A-9755, and connect the
playback components to the preamp.
separate preamp.
In this case, use an analog audio cable to connect the
A-9755’s MAIN IN jacks to the preamp’s output jacks.
Connect the speakers to the A-9755, and connect the
playback components to the preamp.
Notes:
• Do not connect a component that does not have an
• Do not connect a component that does not have an
output volume control, because the sound will be out-
put at maximum volume and may damage the A-9755
and your speakers.
put at maximum volume and may damage the A-9755
and your speakers.
• To turn on the MAIN IN function, press the [POWER
AMP DIRECT (MAIN IN)] button for 3 seconds
until the indicator lights up (page 17).
until the indicator lights up (page 17).
Connecting
Components
If you connect other Onkyo components to the
A-9755/A-9555 with the appropriate
A-9755/A-9555 with the appropriate
and audio
cables, you can use the following system functions.
cables are special cables solely for use with Onkyo
products (no
products (no
cables are supplied with the
A-9755/A-9555).
Auto Power On
When you turn on the power or start playback on a com-
ponent that’s connected to the A-9755/A-9555, the
A-9755/A-9555 will turn on automatically. And when
you set the A-9755/A-9555 to Standby, all connected
components will go on Standby as well (the
A-9755/A-9555’s POWER switch must be set to ON for
this to work).
When you turn on the power or start playback on a com-
ponent that’s connected to the A-9755/A-9555, the
A-9755/A-9555 will turn on automatically. And when
you set the A-9755/A-9555 to Standby, all connected
components will go on Standby as well (the
A-9755/A-9555’s POWER switch must be set to ON for
this to work).
Direct Change
When playback is started on an audio component con-
nected via
When playback is started on an audio component con-
nected via
, the A-9755/A-9555 will automatically
select that component as the input source.
Remote Control Operation
You can control all components in your system by using
the A-9755/A-9555’s remote controller. See page 8 for
more information.
You can control all components in your system by using
the A-9755/A-9555’s remote controller. See page 8 for
more information.
With
(Remote Interactive), you can control your
-compatible Onkyo CD player, Tuner, and so on
with the A-9755/A-9555’s remote controller.
• To use
• To use
, you must make an analog audio con-
nection between the A-9755/A-9555 and each
audio component.
audio component.
Notes:
• Push each plug in all the way to make a good connec-
• Push each plug in all the way to make a good connec-
tion.
• Use only dedicated
cables for
connections
(no
cables are supplied with the
A-9755/A-9555).
• The A-9755/A-9555 has two
jacks. They’re all
the same, so you can use either of them.
•
jacks should be connected only to Onkyo compo-
nents. Connecting them to another manufacturer’s
component may cause the A-9755/A-9555 to mal-
function.
component may cause the A-9755/A-9555 to mal-
function.
• Some components may not support all
functions.
See the manuals supplied with your other Onkyo
components for more information.
components for more information.
• When using the A-9755 as a power amplifier (MAIN IN
function), the
system functions are unavailable.
PRE OUT
Onkyo CD player
(DX-7555), etc.
(DX-7555), etc.
A-9755/A-9555
connector
Remote control cable
connector
Onkyo cassette
deck, etc.
deck, etc.
Remote Interactive
Dock, etc.
Dock, etc.
connector