Справочник Пользователя для Atlas Sound CP400

1601 JACK MCKAY BOULEVARD ENNIS, TEXAS 75119 U.S.A.   •    TELEPHONE: (800) 876-3333   •   FAX: (800) 765-3435

©2008 ATLAS SOUND LP 

Printed in U.S.A. 

    

ATS002102 RevD 2/08 

PP 

Introduction, Features, Applications.............................................................………………………………….3

Front Panel Description......................................................................…………………………………..…….4 

 

Rear Panel Description......................................................................…………………………………..……..5

Input Wiring......................................................................…………………………………..…………………..7

 

Speaker Output Wiring...................................................................................………………………………..9 

Specifications..........................................................................................…………………………………….15

Warranty................................................................................................……………………………………...16

 

 

Please Read Carefully Before Installing or Operating This Product
• Read instructions fully.
• Pay attention to any and all warnings.
• Connect this amplifier only to the correct operating voltage.
• Do not attempt to service this unit. Only a qualified service technician should open this unit for    
  servicing.
• Warning  – To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

All professional loudspeaker systems are easily capable of producing very high sound pressure levels. 
Use care with the operation of this amplifier and wear the appropriate hearing protection. Exposure to 
excessive sound pressure levels can cause permanent hearing damage.

The Atlas Sound CP400 and CP700, when in operation, can produce a shock hazard at the speaker 
terminals. Make sure the amplifier is turned off when installing or removing connections at the speaker 
terminal barrier strip. After connecting the proper speaker load, 

REPLACE the terminal strip cover!

Although the CP400 and CP700 are internally fan cooled and have thermal protection circuitry, adequate 
ventilation is required to ensure trouble-free operation. When rack mounting one or more of the Atlas 
Sound CP Series power amplifiers, install an exhaust fan in the rack to evacuate heat buildup. Consult 
Atlas Sound’s Technical Support at 1-800-876-3333 for advice on thermal management and assistance 
with rack selection for this product.

Although the internal output transformers are mounted close to the front panel, when rack mounting the 
CP400 and CP700, be sure the unit has adequate front and rear support.