Справочник Пользователя для Atlas Sound CP400
Specifications are subject to change without notice
AtlasSound.com
1601 JACK MCKAY BOULEVARD ENNIS, TEXAS 75119 U.S.A. • TELEPHONE: (800) 876-3333 • FAX: (800) 765-3435
©2008 ATLAS SOUND LP
Printed in U.S.A.
ATS002102 RevD 2/08
PP
OWNER'S MANUAL
CP400 & CP700 COMMERCIAL
POWER AMPLIFIER
POWER AMPLIFIER
7
INPuT WIRINg
Balanced Inputs
Balanced input wiring requires two conductors with shield (22-gauge is the most common). The use of
crimp type spade lugs is highly recommended for permanent installations. At the input section located on
the rear of the amplifier, wire the “hot”/positive lead to the “+” terminal, the “common”/negative lead to the
“-” terminal and the shield/drain to the “ground” terminal (Figure 3).
Balanced input wiring requires two conductors with shield (22-gauge is the most common). The use of
crimp type spade lugs is highly recommended for permanent installations. At the input section located on
the rear of the amplifier, wire the “hot”/positive lead to the “+” terminal, the “common”/negative lead to the
“-” terminal and the shield/drain to the “ground” terminal (Figure 3).
The XLR inputs (+4 dB balanced line level) can be utilized with standard 3-pin XLR male to female patch
cables to accommodate outputs from a mixer, equalizer, or crossover when the amplifier is used as a
portable sound system amplifier.
cables to accommodate outputs from a mixer, equalizer, or crossover when the amplifier is used as a
portable sound system amplifier.
Figure 3
Black (-)
Shield
White (+)
Black (-)
Shield
White (+)