Справочник Пользователя для Behringer FEX800

MINIFEX FEX800 User Manual

There are various ways to integrate the FEX800 into your set-up. Depending on 

the application in question, you will need different sets of connecting cables. 

The cables to use are described below.

Please use standard insert cables equipped with 1/4" connectors to connect the 

MINIFEX to the insert path of a mixing console. These Y cables have two 1/4" TS 

connectors at one end, and one 1/4" TRS connector at the other. Connect the plug 

marked „Send“ to the INPUT L jack on the effects unit. Connect the „Return“ 

plug to the OUTPUT L jack on the device. Connect the TRS connector to the insert 

jack of the channel strip on the mixing console. Use two insert cables for stereo 

sub-groups and main-mix inserts. The second cable must be connected to the 

INPUT/OUTPUT R jacks of the FEX800.

sleeve
ground/shield

tip
signal

Return

(out)

sleeve
ground/shield

tip
signal

Send

(in)

sleeve
ground/shield

ring
return (in)
tip
send (out)

Fig. 5.1: Insert cable with two 1/4" TS and one 1/4" TRS connector

To wire the MINIFEX in series with other equipment or via the aux paths of a 

mixing console, please use 1/4" cables, sometimes also referred to as patch cords. 

These cables have a 1/4" connector at each end. Connect the aux send outputs of 

your console to the inputs, and the aux returns to the outputs of the MINIFEX. 

You can also connect balanced stereo 1/4" cables to the MINIFEX outputs.

sleeve
ground/shield

ring
cold (-ve)

tip
hot (+ve)

sleeve
ground/shield

ring
cold (-ve)

tip
hot (+ve)

Fig. 5.2: Unbalanced cable with 1/4" TS connectors