Справочник Пользователя для Marantz SR7500

When in the auto stereo mode, 

 indicator will

be illuminated on the display.
The “

” indicator is illuminsted when a stereo

broadcast is tuned in.
At open frequencies, the noise is muted and the
“

” and “

” indicators are not illuminated.

If the signal is weak, it may be difficult to tune into
the station in stereo. In such a case, press the

 button on the front panel.Or press the

button and press the 

 button until PAGE1

is displayed. Press the 

 button.

“

” indicator is not illuminated, if FM stereo

broadcasts are received in monaural and the “

”

indicator is not illuminated.
To return to auto stereo mode, press the 

button or press 

button on the remote

again. 

 indicator is illuminated the display.

AAC

To operate the unit from the remote control, press
the TUNER button on the remote control so that
the tuner mode is engaged.

Frequency scan step for AM is selectable.
Default setup is 9 kHz step, if your country’s
standard is 10 kHz step, Press 

button on

the remote more than 6 seconds. Scan step will
change.

• Preset memory for the tuner will clear by changing

this setup.

To select tuner and desired band (FM or AM),
press the 

button on the front panel.

Press the

 or   cursor buttons on the front

panel for more than 1 second to start the auto
tuning function.

Automatic searching begins then stops when
a station is tuned in.

To select tuner and desired band (FM or AM),
press the 

button twice within two

seconds on the remote.

Press the 

 button until PAGE2 is displayed.

Press and hold the 

 or 

 button for 1 second or more.

Automatic searching begins then stops when
a station is tuned in.

If tuning does not stop at the desired station, use to
the “Manual tuning” operation.

To select tuner and desired band (FM or AM),
press the 

button on the front panel

Press the

 or   cursor buttons on the front

panel to select the desired station.

To select tuner and desired band (FM or AM),
press the 

button twice within two

seconds on the remote.

Press the 

 button until PAGE2 is displayed

Press the 

 or 

 button

to tune in the deseired station.

AAC

AAC

To select tuner and desired band (FM or AM),
press the 

button twice within two

seconds on the remote.

Press the 

on the remote, display will

show “

”.

Input your desired station’s frequency with the
ten numbered keypad on the remote.

The desired station will automatically be
tuned.