Справочник Пользователя для LightSpeed Technologies 850iR

8 5 0 i R   U s e r   M a n u a l

3.  Slip the REDMIKE with lanyard around the neck 

and position the top of the microphone just below 

the collarbone. NOTE: Positioning of the REDMIKE is 

critical for proper volume adjustment. 

4.  While speaking in a normal voice 

slowly increase the volume of the 
corresponding channel on the 850iR 
until your voice is barely audible. 
REMEMBER:

This equipment 

supplements the user’s voice so they are able  to speak in a conversational tone. 
Having the volume set too high will result in feedback and listener fatigue.

INITIAL SET-UP: REDMIKE

250  400  700  1K  1K4  2K5  4K  6K

+10 

0 

-10 

5.  Once initial volume level is set, walk 

around the room and listen for audio 
dropout and overall audio quality.  
Fine-tuning the audio is accomplished by 
making minor adjustments to the 8-Band 
Graphic Equalizer on the back panel of  
the 850iR. 

6.  If a second REDMIKE was 

purchased, repeat steps 2-4. 
NOTE:

 Each REDMIKE has its 

channel pre-set to either A or 
B. No further adjustment is 
necessary.

1.  Turn the 850iR power switch to the 

ON position. The RED LED on the 
switch will glow.

2.  Turn on the REDMIKE. The RED IR LED on the 

850iR will light to indicate a signal is being 

received.