Справочник Пользователя для Audiovox BP212

The lighting elements of your Jensen products provide you with a unique custom touch to your 
vehicle. Jensen’s Red and Blue-Hue illumination allows great creative oppor tunities for the beginner 
and seasoned custom installer alike. The interior of your vehicle will never sound or look ordinar y 
again. Let your imagination take you there.

The lighting features of all Jensen products require a 12 volt power source to operate. The polarity
(+ and -) indicators for each set of inputs also appear on terminal cup.

Notice: There are no removable or ser viceable par ts on 
the speaker. Tampering with the speaker or any of it's 
components will damage the speaker and void the 
warranty.

Connect the positive (+) wire from amplifier output to 
the positive terminal (red) on enclosure.

Connect the negative (-) wire from amplifier output to 
the negative terminal (black) on enclosure.

–

+

Lighting Hook-Up From Rear

+

+

-

NOTE: Must use 12 volt switched output ONLY.

1.

Do not connect amplifier or any audio source to Jensen-
lighting inputs. Inputs are designed for switched 12-Volt DC 
power source only. Do not connect your Jensen product 
directly to your batter y permanently, as it will cause your 
batter y to discharge. Please use a switched 12 volt source.
See fig. 1, (illustrates wiring diagram) be sure to maintain 
polarity. Be sure to connect to a constant switched 12 volt 
source. Correct connection would be the switched positive 
(+) 12 volt wire to the Positive (+) lighting input terminal 
and connect the negative (- ) lighting input terminal to a 
good chassis ground or negative (- ) ground wire.