Справочник Пользователя для Audiovox BP110

The lighting elements of your Jensen products provide you with a unique custom touch to your 
vehicle. Jensen’s Red and Blue-Hue illumination allows great creative oppor tunities for the beginner 
and seasoned custom installer alike. The interior of your vehicle will never sound or look ordinar y 
again. Let your imagination take you there.

The lighting features of all Jensen products require a 12 volt power source to operate. The polarity
(+ and -) indicators for each set of inputs also appear on terminal cup.

Notice: There are no removable or ser viceable par ts on 
the speaker. Tampering with the speaker or any of it's 
components will damage the speaker and void the 
warranty.

–

+

Lighting Hook-Up From Rear

+

+

-

NOTE: Must use 12 volt switched output ONLY.

1.

Do not connect amplifier or any audio source to Jensen-
lighting inputs. Inputs are designed for switched 12-Volt DC 
power source only. Do not connect your Jensen product 
directly to your batter y permanently, as it will cause your 
batter y to discharge. Please use a switched 12 volt source.
See fig. 1, (illustrates wiring diagram) be sure to maintain 
polarity. Be sure to connect to a constant switched 12 volt 
source. Correct connection would be the switched positive 
(+) 12 volt wire to the Positive (+) lighting input terminal 
and connect the negative (- ) lighting input terminal to a 
good chassis ground or negative (- ) ground wire.

Connect the positive (+) wire from amplifier output to 
the positive terminal (red) on enclosure.

Connect the negative (-) wire from amplifier output to 
the negative terminal (black) on enclosure.