Справочник Пользователя для Sony LBT-LV100AV
11
MHz
DOLBY NR
VOLUME
TUNED
ALL DISC S
AUTO
STEREO
OFF
3
Press TUNING +/–.
The frequency indication changes and
scanning stops when the system tunes in
a station. “TUNED” and “STEREO” (for
a stereo program) appear.
scanning stops when the system tunes in
a station. “TUNED” and “STEREO” (for
a stereo program) appear.
4
Press TUNER MEMORY.
The next available preset number flashes
in the display. The stations are stored
from preset number 1.
in the display. The stations are stored
from preset number 1.
5
Press ENTER/NEXT.
The station is stored.
6
Repeat steps 1 through 5 to store
other stations.
other stations.
To tune in a station with a weak
signal
signal
Press TUNING MODE repeatedly until
“MANUAL” appears in step 2, then press
TUNING +/– to tune in a station.
“MANUAL” appears in step 2, then press
TUNING +/– to tune in a station.
To store another station on an
existing preset number
existing preset number
Start over from step 1. After step 4, press
TUNING +/– to select the preset number on
which you want to store the station.
TUNING +/– to select the preset number on
which you want to store the station.
You can add a new preset number after the
last preset number.
last preset number.
DOLBY NR
VOLUME
TUNED
ALL DISC S
AUTO
STEREO
OFF
Step 4: Presetting
radio stations
radio stations
You can preset the following number of
stations:
stations:
— 20 for FM and 10 for AM
The bands you can select depend on the kind
of tuner built into your system. Confirm the
bands by pressing TUNER/BAND
repeatedly.
of tuner built into your system. Confirm the
bands by pressing TUNER/BAND
repeatedly.
1
Press TUNER/BAND repeatedly
until the desired band appears in
the display.
until the desired band appears in
the display.
Each time you press this button, the
band changes as follows:
FM
band changes as follows:
FM
y AM
2
Press TUNING MODE repeatedly
until “AUTO” appears in the
display.
until “AUTO” appears in the
display.
5
1
2
4
?/1
(Power)
3
continued