Справочник Пользователя для Kenwood VR-6070

To enable you to obtain optimum enjoyment from the receiver’s listening
modes, make sure to complete the speaker settings (subwoofer, front,
center, and surround speakers) as described below.

%/ fi,

@/#)

1

2

3

The Surround Back and Subwoofer speaker output selections are
displayed as follows:

1 6ch AMP SB
2 6ch AMP SW

Use the MULTI CONTROL knob or Multi (

%/fi) keys to select the

speakers.
Press the SETUP key to proceed to the next SET UP selection.

∧/∨ keys or @/ # keys for the following displays.

1 SP SETUP
2 TEST TONE
3 SP DISTANCE
4 DISP MODE
5 EXIT

The flow of the SET UP is as follows:

SP SETUP

TEST TONE

SP DISTANCE

EXIT

DISP MODE

Front Left

Center

Front Right

Surround Right

Surround Back

Surround Left

Subwoofer

Display Selector

Display Listen

Subwoofer

Front

Center

Surround

Surround

Back

Surround

Mix

Subwoofer

Re-mix

T. TONE

MANUAL

T. TONE

AUTO

L

C
R

SR

SL

SB

SW

 

L

C

R

SR

SL

SW

SB

4

1 Select the SP SETUP  and press the SETUP key again so that

2 Use the MULTI CONTROL knob or Multi (%/fi) keys to select

1 SUBW ON : Subwoofer setting mode to the receiver is

ON.

2 SUBW OFF : Subwoofer setting mode to the receiver is

OFF.

• The initial setting is “SUBW ON”.
• When the setting “SUBW OFF” is selected, the front speakers

are automatically set to “FRNT LARGE” and the procedure skips
to step 

6.

Before step 

6, press the SETUP key to accept the setting.

• When subwoofer output sound is required, select “FRNT

NORMAL”, or select both “FRNT LARGE” and “SW RE-MIX ON”.

• After setting SW (subwoofer) from OFF to ON, 6ch AMP setup

display will appear to enable you to re-select either SW or SB from
the surround back or subwoofer speaker terminal.

3 Press the ∧ key or # key to accept the setting.

• The front speakers setting indication “FRNT” appears.

4 Use the MULTI CONTROL knob or Multi (%/fi) keys to select

1 FRNT LARGE

: Large front speakers are connected

to the receiver.

2 FRNT NORMAL

: Average size front speakers are

connected to the receiver.

• For  “FRNT LARGE” selection, no sound will be heard from

subwoofer speaker even when it is set to on. However, if you
select “SW RE-MIX ON” when subwoofer is selected, you will
be able to hear sound from the subwoofer.
When in STEREO mode, the sound goes directly to front
speaker.

5 Press the ∧ key or # key to accept the setting.

• The center speaker setting indication “CNTR” appears.

6 Use the MULTI CONTROL knob or Multi (%/fi) keys to select

1 CNTR LARGE

: A large center speaker is connected

to the receiver.

2 CNTR NORMAL : An average size center speaker is

connected to the receiver.

3 CNTR OFF

: Center speaker setting mode to the

receiver is OFF.

1 CNTR ON

: Center speaker setting mode to the receiver

is ON.

2 CNTR OFF : Center speaker setting mode to the receiver

is OFF.

7 Press the ∧ key or # key again to accept the setting.

• The surround speaker setting indication “SURR” appears.