Справочник Пользователя для JVC CA-MD70R
– 36 –
English
8
Press SET.
• If you have selected wrong tracks, press CANCEL,
then select the correct tracks by rotating MULTI
JOG.
JOG.
• If you want to cancel the editing, press CANCEL.
9
Press ENTER to finish the editing procedures.
10
Press
0 to eject the MD.
“WRITING” appears while the editing you have
made is being recorded on the MD.
made is being recorded on the MD.
ERASE Function
This function allows you to erase an unwanted track.
• To do the following procedures, use the buttons and
• To do the following procedures, use the buttons and
controls on the unit.
• To stop any time during editing process, press MD EDIT.
1
Insert an MD you want to edit into the MD loading
slot.
The MD IN lamp lights.
slot.
The MD IN lamp lights.
2
Press MD EDIT.
The MD recorder enters editing mode (with DIVIDE
function selected).
The MD recorder enters editing mode (with DIVIDE
function selected).
3
Rotate MULTI JOG until “ERASE” is selected.
4
Press SET.
5
Rotate MULTI JOG to select the track you want to
erase.
erase.
6
Press SET.
• If you have selected a wrong track number, press
CANCEL, then select the correct track number.
7
Repeat steps 5 and 6 if you want to erase more
tracks (up to 16).
tracks (up to 16).
8
Press ENTER to finish your selection of tracks to
erase.
erase.
• If you want to cancel the editing, press CANCEL.
9
Press ENTER again.
10
Press
0 to eject the MD.
“WRITING” appears while the editing you have
made is being recorded on the MD.
made is being recorded on the MD.
Continued
EN32-52.CA-MD70R[E]/F
98.11.6, 11:56 am
36