Справочник Пользователя для JVC CA-MXDK11

Changing the Picture Tone

While showing a playback picture on the TV, you can select
the preset picture tone, or adjust it and store your own
settings.

To select a preset picture tone
1

While playing, display VFP setting screen.

Select a preset picture tone.

To adjust the picture tone
1

Select “USER1” or “USER2.”
• Follow steps 1 and 2 explained above.

Select a parameter you want to adjust.

Adjust the parameter.

Repeat steps 2 to 3 to adjust other parameters.

To remove the setting screen, press VFP again while
holding SHIFT. The screen will automatically be erased
after 9 seconds even if you do not press VFP.

Changing the Display Brightness

You can dim the display window.

Setting the Clock

• To exit from the clock setting, press CLOCK/TIMER as

required.

• To go back to the previous step, press CANCEL while

holding SHIFT.

Activate clock setting mode.

• If you have already adjusted the clock before, press the

button repeatedly until the clock time starts flashing.

Adjust the hour, then minute.

To check the current time when the System is turned on

NORMAL

Normally select this.

CINEMA

Suitable for a movie source.

USER1/USER2

You can adjust parameters and can
store the settings (see below).

GAMMA

Adjust if the neutral color is bright or
dark (–3 to +3).

BRIGHTNESS

Adjust if the picture is bright or dark
as a whole (–8 to +8).

CONTRAST

Adjust if the far and near positions
are unnatural (–7 to +7).

SATURATION

Adjust if the picture is whitish or
blackish (–7 to +7).

TINT

Adjust if human skin color is
unnatural (–7 to +7).

SHARPNESS

Adjust if the picture is indistinct
(–8 to +8).

On the TV screen

(While holding...)

(Normal)

(While holding...)

MX_DK11.book Page 14 Wednesday, December 13, 2006 5:11 PM