Справочник Пользователя для JVC NX-DV3

*1 While the speaker position is "R" (

 page 9, 

10), the speaker setting icon is displayed in the 

initial setting screen, allowing you to set it. It is not 

displayed at other times.

Contents ( 

 : initial setting)

Select an output signal type from the following 

in accordance with the equipment connected to 

the digital audio output terminal (AV amplifier, 

etc.). (See the list below for the preference 

items and output signal.) 

Equipment corresponding only to linear PCM.

Dolby digital decoder or equipment having the 

same function.

DTS/Dolby digital decoder or equipment having 

the same function.

To make adjustments for the difference 

between a high volume and a low volume when 

playing back with low volume (only for a DVD 

recorded with Dolby digital).

D. range compression automatically works.

D. range compression always works.

This allows you to adjust the volume of the 

surround speakers (Sub-woofer does not work 

when 2ch sound is used).
SURROUND RIGHT SPEAKER, 

SUBWOOFER (Displayed when "SUB WFR" is 

set to "ON" (

 

page 40).):

This allows you to select a speaker and adjust 

its volume.
TEST TONE:

A test tone is produced when it is set to "ON". 

The test tone is output from the currently used 

speakers. The output order is click-wise with the 

listening point as a center.

Setting it to "OFF" stops the test tone.
RETURN:

It allows you to return to the speaker-setting 

screen.

If the distance from the listening point to each 

speaker varies, this allows you to set the 

distance between the listening point and each 

speaker.  Improved surrounding effect can be 

obtained by adjusting the sound output timing 

from the speakers.
FRONT SPEAKER:

This allows you to adjust the distance from the 

listening point to the front speakers. The initial 

setting is 3 meters and is adjustable between 

0.3 meters to 9 meters. 
SURROUND SPEAKER:

This allows you to adjust the distance from the 

listening point to the surround speakers. The 

initial setting is 3 meters and is adjustable 

between 0.3 meters to 9 meters. 
RETURN:

It allows you to return to the speaker-setting 

screen.

* There is no output for DVD AUDIO with content protection set.

• For a DVD VIDEO without content protection set, there is a 20 bit or 24 bit output at the digital audio output terminal. 

Playback disc

DIGITAL AUDIO OUTPUT preference

STREAM/PCM

DOLBY DIGITAL/PCM

PCM ONLY

48 kHz, 16/20/24 bits

Linear PCM DVD VIDEO

96 kHz linear PCM DVD VIDEO

48 kHz, 16 bits stereo linear PCM

48/96/192 kHz,

16/20/24 bits linear PCM DVD AUDIO*

48 kHz, 16 bits stereo linear PCM

44.1/88.2/176.4 kHz,

16/20/24 bits linear PCM DVD AUDIO*

44.1 kHz, 16 bits stereo linear PCM

DTS DVD VIDEO/DVD AUDIO*

DTS bit stream

48 kHz, 16 bits stereo linear PCM

DOLBY DIGITAL DVD VIDEO/

DVD AUDIO*

DOLBY DIGITAL bit stream

48 kHz, 16 bits stereo linear 

PCM

CD/VCD/SVCD

44.1 kHz, 16 bits stereo linear PCM/48 kHz, 16 bits linear PCM

DTS CD

DTS bit stream

44.1 kHz, 16 bits linear PCM

MP3/WMA disc

32/44.1/48 kHz, 16 bits linear PCM

List of relationships of DIGITAL AUDIO OUTPUT preference items and output 

signal

NX-DV3[UJ].book  42 ページ  ２００４年１２月２８日　火曜日　午後２時３７分