Справочник Пользователя для JVC RX-668VBK
32
Operating JVC’s Audio/Video Components
You can operate JVC’s audio and video components with this receiver’s remote control, since control signals for JVC
components are preset in the remote control.
components are preset in the remote control.
IMPORTANT:
To operate JVC’s audio components using this remote control:
• You need to connect JVC audio components through the COMPU
• You need to connect JVC audio components through the COMPU
LINK-3 (SYNCHRO) jacks (see page 24) in addition to the
connections using cables with RCA pin plugs (see page 5).
connections using cables with RCA pin plugs (see page 5).
• Aim the remote control directly at the remote sensor on the
receiver.
• If you use the buttons on the front panel or the menu function to
choose a source, the remote control will not operate that source.
To operate a source with the remote control, the source must be
selected using buttons on the remote control.
To operate a source with the remote control, the source must be
selected using buttons on the remote control.
• Refer also to the manuals supplied with your components.
SLEEP ONE TOUCH
OPERATION
TV/VIDEO
3
2
1
6
5
4
9
8
7/P
+10
0
TV
SOUN
D
RE
C P
AUS
E
TEXT DISPLAY
RM-SR668U
REMOTE CONTROL
MUTING
DVD M
ULT
I
POWER
PH
ONO
FM/A
M
DVD
TAPE/M
D
CD
VCR
VOLUME
CH
TV VOL.
OSD
SET
EXIT
10
CD-DISC
CATV
CONTROL
SOUND
CONTROL
TV
CATV/SAT
VCR
AUDIO
SURROUND
TEST
DELAY
EFFECT
– CENTER +
– REAR•L +
ENTER
RETURN
MENU
– REAR•R +
100+
8
Sound control section (Amplifier)
After pressing SOUND CONTROL, you can perform the following
operations:
operations:
SURROUND
:
Selects the DSP modes.
CENTER – / +
: Adjusts the center speaker output level for the
Surround/DVD MULTI playback modes.
REAR•L – / +
: Adjusts the left/right rear speaker output level for
the DSP modes.
Adjusts the left rear speaker output level for the
DVD MULTI playback mode.
Adjusts the left rear speaker output level for the
DVD MULTI playback mode.
REAR•R – / +
: Adjusts the right rear speaker output level for the
DVD MULTI playback mode.
DELAY
:
Selects the delay time of the rear speaker sound.
(Only works when “PRO LOGIC” is selected.)
(Only works when “PRO LOGIC” is selected.)
EFFECT
:
Selects the effect level for the DSP modes.
TEST
:
Turns on or off the test tone output for the
Surround mode.
Surround mode.
Note:
After adjusting sounds, press the corresponding source selecting
button or CD-DISC to operate your target source by using 10 keys;
otherwise, 10 keys cannot be used for operating your target source.
button or CD-DISC to operate your target source by using 10 keys;
otherwise, 10 keys cannot be used for operating your target source.
CD player
After pressing CD, you can perform the following operations on the
CD player:
CD player:
3:
Starts playing.
4
4
4
4
4:
Returns to the beginning of the current (or
previous) track.
¢
¢
¢
¢
¢:
Skips to the beginning of the next track.
7:
Stops playing.
8:
Pauses playing. To release it, press
3.
1 – 10, +10
:
Selects a track number directly.
For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
For track number 30, press +10, +10, then 10.
For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
For track number 30, press +10, +10, then 10.
CD player-changer
After pressing CD-DISC, you can perform the following operations
on a CD player-changer:
on a CD player-changer:
3:
Starts playing.
4
4
4
4
4:
Returns to the beginning of the current (or previous)
track.
track.
¢
¢
¢
¢
¢:
Skips to the beginning of the next track.
7:
Stops playing.
8:
Pauses playing. To release it, press
3.
1 – 6, 7/P
:
Select the number of a disc installed in a CD player-
changer.
changer.
After pressing CD, you can perform the following operations on the
CD player-changer:
CD player-changer:
1 – 10, +10
:
Selects a track number directly.
For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
For track number 30, press +10, +10, then 10.
For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
For track number 30, press +10, +10, then 10.
Tuner
After pressing FM/AM, you can perform the following operations:
FM/AM
:
Alternates between FM and AM.
1 – 10, +10
:
Selects a preset channel number directly.
For channel number 5, press 5.
For channel number 15, press +10, then 5.
For channel number 20, press +10, then 10.
For channel number 5, press 5.
For channel number 15, press +10, then 5.
For channel number 20, press +10, then 10.
EN30_38.RX-668V[J]/f
99.1.16, 2:09 PM
32