Справочник Пользователя для JVC RX-668VBK
35
To change the transmittable signals for
operating a CATV converter or satellite tuner
operating a CATV converter or satellite tuner
1. Press and hold CATV/SAT POWER.
2. Press CATV CONTROL.
3. Enter manufacturer’s code (two digits) using
buttons 1–9, and 0.
See the list below to find the code.
Examples: For a PIONEER product, press 1, then 3.
For a SONY product, press 2, then 0.
4. Release CATV/SAT POWER.
Following button can be used for operating the CATV converter
or the satellite tuner:
or the satellite tuner:
CATV/SAT POWER
Turns on and off the CATV converter
or satellite tuner.
or satellite tuner.
After pressing CATV CONTROL, you can perform the
following operations on the equipment:
following operations on the equipment:
CH +/–
Changes the channels.
1 – 9, 0, 100+ (+10)
Selects the channel.
100+ (+10) button will function as the
ENTER button if your equipment
requires pressing ENTER after
selecting a channel number.
100+ (+10) button will function as the
ENTER button if your equipment
requires pressing ENTER after
selecting a channel number.
RETURN
Alternates between previously
selected channel and the current
channel.
selected channel and the current
channel.
Note:
Refer to the manual supplied with your CATV converter or satellite
tuner.
tuner.
5. Try to operate your CATV converter or satellite
tuner by pressing CATV/SAT POWER.
When your CATV converter or satellite tuner turns on or off,
you have entered the correct code.
If there are more than one code listed for your brand of
CATV converter or satellite tuner, try each one until the
correct one is entered.
you have entered the correct code.
If there are more than one code listed for your brand of
CATV converter or satellite tuner, try each one until the
correct one is entered.
To change the transmittable signals for operating
another manufacturer’s VCR
another manufacturer’s VCR
1. Press and hold VCR POWER.
2. Press VCR.
3. Enter manufacturer’s code (two digits) using
buttons 1–9, and 0.
See the list below to find the code.
Examples: For a JVC product, press 0, then 1.
For a FUNAI product, press 1, then 0.
4. Release VCR POWER.
Following button can be used for operating the VCR:
VCR POWER
Turns on and off the VCR.
After pressing VCR, you can perform the
following operations on the VCR:
following operations on the VCR:
CH +/–
Changes the TV channels on the VCR.
3
Starts playback.
1
Rewinds a video tape.
¡
Fast winds a video tape.
7
Stops operation.
8
Pauses. To resume playing, press
3.
REC PAUSE
:
Pauses recording temporarily.
Note:
Refer to the manual supplied with your VCR.
5. Try to operate your VCR by pressing VCR POWER.
When your VCR turns on or off, you have entered the correct code.
If there are more than one code listed for your brand of VCR,
try each one until the correct one is entered.
If there are more than one code listed for your brand of VCR,
try each one until the correct one is entered.
Manufacturer
Codes
Manufacturer
Codes
EMERSON
11
RCA
05, 06
FUNAI
10, 14, 15, 16
SAMSUNG
24
GOLD STAR
12
SANYO
21, 22, 23
HITACHI
04
SHARP
27, 28, 29
JVC
01, 02, 03
SONY
18, 19, 20
MITSUBISHI
13
SHINTOM
30
NEC
25
TOSHIBA
26
PANASONIC
07, 17
ZENITH
08
PHILIPS
09
Manufacturers’ codes are subject to change without notice. If they
are changed, this remote control cannot operate the equipment.
are changed, this remote control cannot operate the equipment.
Manufacturer
Codes
GI JERROLD
01, 02, 03, 04, 05,
06, 07, 08
HAMLIN/REGAL
15, 16, 17, 18
PIONEER
13, 14
SCIENTIFIC ATRANTA
09, 10
ZENITH
11, 12
RCA
19
SONY
20
Manufacturers’ codes are subject to change without
notice. If they are changed, this remote control cannot
operate the equipment.
notice. If they are changed, this remote control cannot
operate the equipment.
EN30_38.RX-668V[J]/f
99.1.16, 2:09 PM
35