Справочник Пользователя для JVC CA-D672TR
![JVC](https://files.manualsbrain.com/attachments/5a164373f8011a1a722bf4f4e2a525689656bbe7/common/fit/150/50/49632231f75d09f0c41422c0d8935c786899406d6105204c6d7c8b00c0b3/brand_logo.jpeg)
16
English
3.
Press the PTY SELECT button to choose a PTY.
❏ The programme type display changes with each press of the PTY SELECT button as shown
❏ The programme type display changes with each press of the PTY SELECT button as shown
below.
TRAFFIC
TRAFFIC
= NEWS = INFO = POP M = ROCK M = M.O.R. M = LIGHT M = CLASSICS =
OTHER M
= AFFAIRS = SPORT = EDUCATE = DRAMA = CULTURE = SCIENCE =
VARIED
= (back to the beginning)
4.
Press the PTY SEARCH button again.
While the search function is running, the selected programme type and “SEARCH” alternate on
the display. The preset number also change.
While the search function is running, the selected programme type and “SEARCH” alternate on
the display. The preset number also change.
Once the station which is broadcasting the selected PTY (Programme Type) is located, searching
will stop. Then the station name (if PS code is being sent) will be indicated and the broadcast will
commence. The Display will stay blinking for 10 seconds from the end of the searching function. If
you press the PTY SEARCH button again during this period, search for the same PTY (Programme
Type) will restart.
The PTY Search function is completed when the indicated preset Number changes from blinking to
continuously lit.
❏ If a station broadcasting a selected PTY( Program Type) cannot be found, “NOT” and
will stop. Then the station name (if PS code is being sent) will be indicated and the broadcast will
commence. The Display will stay blinking for 10 seconds from the end of the searching function. If
you press the PTY SEARCH button again during this period, search for the same PTY (Programme
Type) will restart.
The PTY Search function is completed when the indicated preset Number changes from blinking to
continuously lit.
❏ If a station broadcasting a selected PTY( Program Type) cannot be found, “NOT” and
“FOUND” are displayed alternately on the display after the Unit has searched through the preset
numbers. The Unit will then return to the station to which it was tuned prior to the start of the
PTY Search.
numbers. The Unit will then return to the station to which it was tuned prior to the start of the
PTY Search.
To cancel a PTY Search operation, use the PTY SEARCH button and MULTI CONROL stick to
select another function.
select another function.
Note: PTY Search can be used even while AM (MW/LW) broadcasts are being received.
EON Function ——————————————————————————
With the EON (Enhanced Other Networks) code, the Unit can perform a standby reception which
will enable you to obtain desired information which is available from other stations.
will enable you to obtain desired information which is available from other stations.
❏ “EON” will be displayed while receiving stations with an EON code.
❏ EON Standby reception is applicable for preset stations only.
❏ You can set EON Standby reception regardless of types of receiving bands.
❏ EON Standby reception is applicable for preset stations only.
❏ You can set EON Standby reception regardless of types of receiving bands.
Setting EON Standby reception
1.
Press the EON ON/OFF button.
[TA NEWS INFO], or the last EON information type selected, is displayed.
[TA NEWS INFO], or the last EON information type selected, is displayed.
2.
Select information you want by pressing the TA/NEWS/INFO button.
TA:
TA:
Identifies that a traffic announcement is being broadcast in your area.
NEWS: News
INFO:
INFO:
Programs on medical service, weather forecast, etc.
❏ With each pressing of the TA/NEWS/INFO button, indications will change as follows:
[ TA NEWS INFO ]
=
[ TA NEWS INFO ]
=
[ TA NEWS INFO ]
=
[ TA NEWS INFO ]
=
[ TA NEWS INFO ]
=
[ TA NEWS INFO ]
=
[ TA NEWS INFO ]
=
(back to the beginning)
As soon as your selection is entered the Unit will go into EON Standby reception mode.
If you want to cancel the EON function, turn off the [TA NEWS INFO] indicator by pressing the
EON ON/OFF button.
EON ON/OFF button.
When this Unit carries out EON Standby reception, the indication will change as follows:
1. Waiting for EON Standby reception
6
PTY SELECT
3
PTY SEARCH
EON
ON/OFF
TA/NEWS
/INFO
AUTO
SOUND
MODE
TUNED
STEREO
STEREO
1 2 3 4
5 6 7 8
9 10 11 12
14
13
15 16
VOL
TUNER
EON [ TA NEWS INFO ]
EN01-42.CA-D672TR[E]/F
05.3.24, 9:25 PM
16