Справочник Пользователя для Samsung AH68-01018B
GB
9
The AM aerial (for long and medium waves) can be:
Placed on a stable surface
Fixed to the wall (you must first remove the base)
The
AM aerial connector terminals are located on the rear of the system and are marked AM .
To avoid noise interference, check that the loudspeaker wires do not run close to the
aerial wires.
Always keep them at least 2 inches (5 cm) away.
aerial wires.
Always keep them at least 2 inches (5 cm) away.
Connecting the AM (MW)/LW Aerial
How to connect a COAXIAL TYPE aerial.
Connect a 75
Ω
antenna to the
FM antenna terminal.
Plug the connector on the
FM aerial supplied into the coaxial socket (75
Ω
) marked
FM on the rear of the system.
Follow the instructions given on Page 14 to tune into a radio station, and determine the best position for the aerial.
If reception is poor, you may need to install an outdoor aerial.
To do so, connect an outdoor
To do so, connect an outdoor
FM aerial to the FM socket on the rear of the system using a 75
Ω
coaxial cable (not supplied).
Connecting the FM Aerial
DIGITAL OUT
OPTICAL
DIGITAL OUT
OPTICAL
Connecting the SW Aerial (option)
How to connect a WIRE TYPE aerial.
Spread the
SW
aerial out and attach the ends to a wall, in the position
providing the best reception.
If reception is poor (e.g. distance from transmitter too great, walls blocking
the radio waves, etc.), install an outdoor aerial.
the radio waves, etc.), install an outdoor aerial.