Справочник Пользователя для Panasonic SC-HC38
17
RQT9742
EN
GL
IS
H
3
Attach the wall mount bracket to the wall with
2 screws (not supplied). (Both sides)
2 screws (not supplied). (Both sides)
≥ Use a spirit level to ensure both wall mount brackets
are level.
≥ Make sure that the screw used and the wall are
strong enough to support the weight of at least
33 kg (72.8 lbs).
33 kg (72.8 lbs).
4
Fix the safety holder onto the unit with the
screw (supplied).
screw (supplied).
{.
Screw tightening torque: 50 N0cm (0.4 lbf0ft) to
70 N0cm (0.5 lbf0ft).
5
Attach the fall prevention cord (not supplied) to
this unit.
this unit.
≥ Use a cord that is capable of supporting over 33 kg
(72.8 lbs) (with a diameter of about 1.5 mm (
1
/
16
q)).
6
Hook the unit securely onto the wall mount
brackets with both hands.
brackets with both hands.
≥ Connect the FM antenna and the AC power supply
cord to the unit before hanging the unit onto the
wall. (
wall. (
l
5)
≥ After hanging the unit, release your hands carefully
to confirm the unit sits securely on the wall.
7
Drive the safety holder fixing screw
(not supplied) to secure the safety holder onto
the wall.
(not supplied) to secure the safety holder onto
the wall.
≥ Make sure that the screw used and the wall are
strong enough to support the weight of at least
33 kg (72.8 lbs).
33 kg (72.8 lbs).
≥ Refer to step 3 for requirements before screwing.
8
Attach the fall prevention cord (not supplied) to
the wall.
the wall.
≥ Make sure that the screw used and the wall are
strong enough to support the weight of at least
33 kg (72.8 lbs).
33 kg (72.8 lbs).
≥ Make sure that the slack of the cord is minimal.
At least 30 mm (1
3
/
16
q)
‰7.5 mm (
19
/
64
q)
to
‰9.4 mm (
‰9.4 mm (
3
/
8
q)
‰4 mm
(
(
5
/
32
q)
Wall mount bracket
Screw
(supplied)
(supplied)
Cord (not supplied)
Wall
Safety holder fixing screw
(not supplied)
(not supplied)
Safety holder
Fixed to the
wall
wall
Cord (not supplied)
Screw eye (not supplied)
Wall
SC-HC38~RQT9742.book Page 17 Tuesday, December 11, 2012 2:20 PM