Справочник Пользователя для Panasonic SC-PM29

Скачать
Страница из 28
26
RQT7372
Specifications
g
 AMPLIFIER SECTION
RMS Power output
10% Total harmonic distortion
1 kHz, both channels driven
(
Low channel) 
35 W per channel (6 Ω)
8 kHz, both channels driven
(High channel)
 
35 W per channel (6 Ω)
Total Bi-Amp power 
70 W per channel
Input sensitivity
AUX  
250 mV
Input Impedance
AUX  
11.8 kΩ
g
 FM TUNER SECTION
Frequency range 
87.9 - 107.9 MHz
Sensitivity 
1.8 µV (IHF)
S/N 26 dB 
1.5 µV 
Antenna terminal(s) 
75 Ω (unbalanced)
g
 AM TUNER SECTION
Frequency range 
530 - 1710 kHz 
 
Sensitivity 
S/N 26 dB (at 999 Hz) 
560 µV\m 
g
 CASSETTE DECK SECTION
Track system 
4 track, 2 channel 
 
Heads 
Record/playback 
Solid permalloy head
Erasure 
Double gap ferrite head
Motor 
DC servo motor 
Recording system 
AC bias 100 kHz 
Erasing system 
AC erase 100 kHz
Tape speed 
4.8 cm/s
Overall frequency response
(+3 dB, -6 dB at DECK OUT) 
NORMAL (TYPE I) 
35 Hz - 14 kHz
S/N 
50 dB (A weighted) 
Wow and flutter 
0.18% (WRMS) 
Fast forward and rewind time 
   
Approx. 120 seconds with
 
 
C-60 cassette tape
g
 CD SECTION
Disc played
CD/MP3/WMA 
8cm/12cm, CD-R/RW
Sampling frequency 
44.1 kHz
Decoding 
16 bit linear
Pickup
Note
1. Specifications are subject to change 
without notice.
  Mass and dimensions are approximate.
2. Total harmonic distortion is measured by 
the digital spectrum analyzer.
3. The labels “HIGH (HF)” and “LOW (LF)” 
on the rear of the speakers refer to High 
frequency and Low frequency.
When moving the 
unit
1.  Remove all discs.
2.   Press [
8] to turn the unit 
off.
3.   Disconnect the AC mains 
lead.
Maintenance
For a cleaner crisper sound
Clean the heads regularly to assure 
good quality playback
and recording.
Use a cleaning tape (not included).
If the surfaces are dirty
To clean this unit, wipe with a soft, 
dry cloth.
l
   Never use alcohol, paint thinner or 
benzine to clean this unit.
l
   Before using chemically treated 
cloth, read the instructions that 
came with the cloth carefully.
This product may receive radio interference 
caused by mobile telephones during use. 
If such interference is apparent, please 
increase separation between the product 
and the mobile telephone.
Beam source/wavelength 
  
Semiconductor laser/780 nm
Number of channels 
Stereo
Frequency response 
   
20 Hz - 20 kHz (+1, -2 dB)
Wow and flutter 
Below measurable limit
Digital filter 
8 fs
D/A converter 
MASH (1 bit DAC)
MP3 
Bit rate 
32 kbps - 320 kbps
Sampling frequency 
  
32 kHz, 44.1 kHz, 48 kHz
WMA 
Sampling frequency 
  
32kHz, 44.1kHz, 48kHz
g
 SPEAKER SECTION
Type 
2 way 2 speaker system
Speaker(s) 
Woofer 
10 cm cone type
Tweeter 
6 cm cone type
Impedance 
HIGH 
6 Ω
LOW 
6 Ω
Input power 
HIGH 
70 W (Music)
LOW 
70 W (Music)
Output sound pressure level 
   
80 dB/W (1.0 m)
Cross over frequency 
3.5 kHz
Frequency range 
   
55 Hz - 31 kHz (-16 dB)
   
75 Hz - 26 kHz (-10 dB)
Dimensions (W x H x D) 
   
155 x 250 x 258 mm
Mass 
2.3 kg
g
 GENERAL
Power supply 
AC 120 V, 60 Hz)
Power consumption 
130 W
Dimensions (W x H x D) 
   
179 x 247 x 378 mm
Mass 
5.4 kg
Power consumption in standby
mode:  
Approx. 0.6 W
Product Service
1. Damage requiring service - The unit should be serviced by 
qualified service personnel if: 
(a)  The AC power supply cord or the plug has been damaged; or 
(b)  Objects or liquids have gotten into the unit; or 
(c)  The unit has been exposed to rain; or 
(d)  The unit does not operate normally or exhibits a marked 
change in performance; or 
(e)  The unit has been dropped or the cabinet damaged. 
2. Servicing - Do not attempt to service the unit beyond that 
described in these operating instructions. Refer all other 
servicing to authorized servicing personnel. 
3. Replacement parts - When parts need replacing ensure the 
servicer uses parts specified by the manufacturer or parts that 
have the same characteristics as the original parts. Unauthorized 
substitutes may result in fire, electric shock, or other hazards. 
4. Safety check - After repairs or service, ask the servicer to 
perform safety checks to confirm that the unit is in proper working 
condition.
The servicer will require all components to service your system.
Therefore, should service ever be necessary, be sure to bring the 
entire system.
Product information
For product information or assistance with product operation: 
 In the U.S.A., refer to “Customer Services Directory” on page 27.
For assistance in the continental U.S.A in obtaining repairs please 
ship the product to:
     Panasonic Services Company - Customer Servicenter
     Suite B 4900 George McVay Drive, MacAllen, TX 78503
In Puerto Rico contact the Panasonic Sales Company.
     Tel. (787) 750-4300    Fax. (787) 768-2910
When shipping the unit carefully pack and send it prepaid, 
adequately insured and preferably in the original carton. Include a 
letter detailing the complaint and provide a day time phone number 
where you can be reached.
IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD 
THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES 
RECEIPT/  PROOF OF PURCHASE INDICATING DATE OF 
PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. 
CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY 
UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE.
Also, the purchaser will be responsible for shipping the unit to 
the above   address. In Canada, contact Panasonic Canada 
Inc. Customer Care Centre at 905-624-5505, or visit website 
(www.panasonic.ca), or an authorized Servicentre closest to you.