Справочник Пользователя для Philips FW-D596

36

Press TUNER (BAND) repeatedly to select the
desired tuner band: FM or MW.

Press and hold 

1 / ¡ on the system or

4 / ¢ on the remote control to search a
radio frequency.

Press PROGRAM.
➜ “PROG”  and “P 01” will display.

Press O / P on the system, 

2 / 3 or

numeric keys (0-9) on the remote control to
select the desired preset number.

After selecting an address number, press
PROGRAM again to store the radio station.

● Repeat steps 3-5 to store other preset radio

stations.

● Press 7 on the system.

● In tuner mode, press 2 or 3 or use the

numeric keys (0-9) to select the desired
preset number.
➜ The preset number, radio frequency, and
waveband are displayed.

Press O or P to select the preset radio station
to be erased.

Press and hold 

7 on the system until  “PRESET

DELETED” appears on the display.

➜ The radio frequency remains on the display.

➜ The preset numbers of all other preset radio
stations in the band with higher numbers are
also decreased by one.

● Repeat steps 1-2 to erase other preset radio

stations.

In some countries, the frequency step between
adjacent channels in the MW band is 9 kHz (10
kHz in some areas). The preset frequency step in
the factory is 9 kHz.

Plug the AC power cord.

Press TUNER to select MW mode.

Press and hold 9 for more than 3 seconds when
reconnecting the system to the AC power
supply.
➜ “STEP  XX K” appears.