Справочник Пользователя для Toshiba W-705

2 1

Adjusting the tracking

When playback starts, the VCR automatically
adjusts the tracking for clear pictures and sound
(Digital Auto Tracking).
The “DT” indicator blinks during the adjusting.
If the VCR cannot locate the best possible
tracking point, hold down one of 

TRACKING to

adjust the tracking manually.
• To resume the digital auto tracking, hold down

both 

CHANNEL on the VCR simultaneously for

about 2 seconds.

Notes
• During the adjusting, the playback picture and

sound may be distorted.

• The digital auto tracking is activated only in the

playback mode.

• To reset the manual tracking point to the center,

press both 

CHANNEL on the VCR

simultaneously or 

 for not longer

than 1 second.

• The noise on the screen may not be completely

eliminated depending on the tape used,
especially when the tape was recorded on
another VCR.

19

µ

 HEAD

You can view high quality pictures while playing
back a tape recorded in the SLP tape speed.
By pressing 

µ

 repeatedly, the 19

µ

 HEAD mode

is displayed on the TV screen as follows:

19U-HEAD AUTO: Usually set to “AUTO”. As the
playback starts, the VCR automatically activates
the 19

µ

 head and reproduces high quality pictures.

19U-HEAD OFF:  Set to “OFF” if the pictures are
marred by dots.

Note
During playback with the 19

µ

 head, momentary

noises or shakes may be produced when you
change the mode to the picture search or
variable speed playback.

Basic Playback

Load a recorded cassette.

Power is turned on.
If the cassette has no safety tab,
playback starts automatically.

Press 

PLAY to start playback.

To stop playback, press 

STOP.

Rewinding / Fast-forwarding

Press 

REW or FF in the Stop mode.

This section explains the basic playback operation.

Preparation
• Select the video channel (3 or 4) or video input mode on the TV.
• Press 

a

8

9

J

(

)

-

L

µ