Справочник Пользователя для Yamaha MS300

 

A

 

This switch turns the power to the MS300 on and 
off. When you turn this switch on, the POWER 
indicator (

 

8

 

) lights up green.

 

B

 

Connect the included power cord here.

 

C

 

These balanced connectors accept input from 
line-level sources, such as a mixer. The connec-
tors include: an XLR-3-31 type; an XLR-3-32 
type; a 1/4" TRS phone jack. They are all con-
nected in parallel and can be used as line outputs. 
In this case, input signals from the MIC connec-
tor (

 

5

 

) will not be output.

 

D

 

This control enables you to adjust the level of sig-
nal input from the LINE connectors (

 

3

 

).

 

E

 

Mic-level sources are input at this balanced, 
XLR-3-31 type connector. The internal low-cut 
filter will cut the range of these signals below 
70 Hz. The mic input will not be routed to any 
destination other than the speaker.

 

F

 

This control enables you to adjust the level of sig-
nal input at the MIC connector (

 

5

 

).

 

G

 

This control enables you to adjust the entire vol-
ume level.

 

H

 

When you turn the power on, this indicator lights 
up green.

 

I

 

 This EQ adjusts the low band in the range 

of 0 ~ –8 dB with a center frequency of 55 Hz. 
The 0 (MAX) setting is flat. Turn the control 
couterclockwise to cut.

 

 This EQ adjusts the high band. The arrow 

setting 

 is flat. Turn the control clockwise to 

boost and couterclockwise to cut the HF band 
(1.6 kHz or higher) in the range of ±3 dB.

7

5

8

6

4

1

2

3

9