Листовка для Samsung GH68-11254A

Be sure to first follow the 
Quick Start Guide on 
the reverse side of this guide 
to complete initial setup 
of your headset.

To turn the headset on, 
Press and hold the Multi-Function button for 
4 seconds until you see 4 blue flashes on the 
indicator light, then release. 
You will hear a tone and see the indicator light 
flashes while the power is on 
(see Meaning of the indicator light of this guide).

To turn the headset off, 
Press and hold the Multi-Function button for 
4 seconds until you see 2 blue flashes on the 
indicator light, then release.
You will hear series of 2 tones and see the indicator 
light stops flashing.

Wear the headset on your ear. 
In general, you will get better performance 
when there are no obstructions 
(including parts of your body) 
between the headset 
and the phone.

Depending on which ear you are going to wear the 
headset, simply adjust the hook accordingly.

Press [

] on the side of the headset to increase 

the volume level and press [

] to decrease the 

volume level.

Making a voice activated call
If the phone’s voice recognition feature is on, you can 
make a voice activated call.
Press the Multi-Function button once. You will hear the 
voice-activation tone.
Say the name of the person you wish to call. 
Depending on your phone, this feature may not be 
supported.

Redialing the last number
If the phone’s voice recognition feature is off, press and 
hold the Multi-Function button for 2 seconds, twice.

If the phone’s voice recognition feature is on,

1 

 Press the Multi-Function button and listen for the 

    voice-activation tone. When you hear it, press the 
    button again to cancel the feature. 

2 

 Press and hold the Multi-Function button to access the 

    recent call list. 

3 

 Press and hold the Multi-Function button to make a call  

    to the last number you have dialed or received.

End a call
Press the Multi-Function button once.

Answer a call
• After you hear the ring tone, press the Multi-Function 
   button once.
• If you answer the call with your phone, you can transfer 
   the call to the headset by pressing the Multi-Function 
   button.

Reject a call
When you receive a call, press and hold the Multi-Function 
button for 2 seconds to reject the call. Depending on your 
phone's setting or type, you may only be able to mute the 
ringer or this feature may not be supported.

Enhanced features are available for phones that support the 
hands-free Bluetooth profile and enhanced features.

• Answer a second call (switching between 2 calls) 
   When your phone notifies you of another incoming call while 
   you are on a call, press and hold the Multi-Function button for 
   2 seconds. 
   You can switch between calls by pressing and holding it for 
   2 seconds. 
   Depending on your phone, this feature may not be supported.

• Place a call on hold 
   While you are on a call, press and hold the Multi-Function 
   button for 2 seconds.
   To retrieve the call, press and hold the Multi-Function button 
   for 2 seconds again.
   Depending on your phone, this feature may not be supported.

• Switch off the microphone 
   Press and hold the Up volume control button to switch off the 
   headset's microphone.
   To switch it back on, press and hold the button again.

Flashes in 
blue every 
8 seconds.

Quick series 
of 2 tones.
(Active mode 
starts.)

The headset is in Active mode.

• The headset has an active 
   call in progress.
• You can talk up to 4 hours.

Flashes in 
blue every 3 
seconds.

Quick series 
of 2 tones.
(Standby 
mode starts.)

The headset is in Standby mode.

• The headset is waiting 
   for a call.
• The headset can be in 
   Standby mode up to 70 
   hours.*

Flashes in 
red instead 
of blue.

5 tones every 
20 seconds.

The battery of the headset is 
low. Recharge the battery.

• There is only 1 minute of 
   talk time left.

*

Depending on the phone type and usage, the actual time 

  may vary.

Left

Right

My phone does not find my headset. 
Make sure the blue indicator light on your 
headset turns on when your phone is 
searching for devices. 

My headsest worked before but now it is 
not working. 
Make sure your phone is on and the Bluetooth 
feature is turned on in your phone. 
If the Bluetooth feature has been turnned off 
or was turned on only temporarily, you may 
need to restart the Bluetooth feature. 
If you have confirmed the Bluetooth feature is 
on in your phone, pair your phone and 
headset again.

Headquarters:
1301 East Lookout Drive Suite 150 
Richardson, TX 75082  

Internet Address: 
http://www.samsungmobileusa.com/
accessories

Customer Care Center: 
1-888-987-4357