Справочник Пользователя для Jabra OTE4

6

Jabra EaSYVOICE

MobilSurf

Infrared port

Wap options

Synchronization

Networks

The handsfree is 

now ready for use

Manual pairing mode
If you wish to use the headset with a different phone, or if the 

pairing process was interrupted, you can manually set the headset 

to pairing mode .
Make sure the headset is on . Press and hold the answer/end button 

for approximately 5 seconds until the Bluetooth® icon turns from 

a steady light to a flashing light . then repeat steps 2 and 3 in the 

above pairing guide .
Connecting with your phone
Pairing is only needed the first time a headset and phone are 

used together . When the headset and phone have been paired 

once, they will automatically connect when the headset is on and 

Bluetooth® is activated on the phone . the headset can be used 

when it is “connected” to the phone . If the devices are paired, but 

do not immediately connect, tap the answer/end button . When 

your headset is connected the Bluetooth® connection icon in the 

StatUSDISPLaY™ WILL bE COnStant On FOr 3 SECOnDS and 

the headset voice guidance will say “connected” . 

WEARING STYLE

the Jabra EaSYVOICE is ready to be worn with or without the ear 

hook . the ear hook can be removed and the headset can be used 

with the Ultimate-fit Eargels™ . 
the Ultimate-fit Eargels™ can be used for both left and right wearing . 

the Ultimate-fit Eargels™ come in two different styles to fit any ear . 

You can also twist the eargel slightly to optimize the fit and comfort . 
For optimal performance, wear the Jabra EaSYVOICE and your 

mobile phone on the same side of your body or within line of sight . 

You will get better performance when there are no obstructions 

between your headset and your mobile phone .