Справочник Пользователя для Jabra 9460

41

Jabra PRO 9460, Jabra PRO 9460 DuO, Jabra PRO 9465 DuO anD Jabra PRO 9470 useR manual

3.  turn the headset in the socket to ensure that it is mounted correctly.

4.  Put on the neckband and headset assembly.

5.  turn the headset boom arm so that the microphone is right in front of the corner of your mouth. 

see also Section 7.1: How to Wear the Headset for illustrations.

1.  hold the assembly firmly in both hands, with the headset in one hand and the ear-cushion assembly of the 

neckband attachment in the other.

2.  Pull the headset away from the ear-cushion assembly of the neckband attachment until it comes free. If you 

have trouble pulling them apart, try to rotate the boom arm about 300 and try again.

7.3  headSet contRolS and SignalS

all Jabra PRO headsets feature a collection of controls and indicators that enable you to manage and monitor 
your calls. these are:
1.  Multifunction button

 

this button is located near the back of the headset. through a combination of taps, double-taps, short presses 

and long presses, you will be able to execute all of the most-needed functions, including answering a call, 

hanging up, switching between held calls, and more.

 

this touch-sensitive panel is similar to the touch pad included with many laptop computers. It enables you to 

adjust the speaker volume and mute/unmute the microphone.

 

a multicolor leD lets others see when you are on the phone and also gives feedback for certain types of 

events, such as low battery, incoming call, etc.

 

the headset generates several types of soft signal tones to let you know when you have an incoming 

call, muted call, call on hold, low battery, or other type of event. It also responds each time you use the 

multifunction button.

1 

2 

3 

4

The Multifunction Button
the table below summarizes the various gestures recognized by the multifunction button. the terms listed in the 
table are often used in this manual when describing how to use the headset.

tap

tap and release instantly (not longer than 0.8 seconds). 

Double tap

two quick taps (less than half a second between them).

Press

Press and hold the button for 1 - 3 seconds.

Note: you can hear whether you have tapped / double-tapped / pressed the button as each gesture is 
identified by a unique tone / series of tones played in the headset. see the table “headset signal tones 
and their meanings” for more.