Справочник Пользователя для Eclipse - Fujitsu Ten CD5441
25
Basic operation
When a CD is already loaded, press the [SOURCE] button
repeatedly to switch to the CD mode.
repeatedly to switch to the CD mode.
■ Listening to the tuner
1 .
Press and hold the [SOURCE] button until the
mode switches to the tuner mode.
mode switches to the tuner mode.
This will turn the tuner on.
To turn the tuner off, press the [SOURCE] button either
shorter to select another mode or longer to turn the
power off.
To turn the tuner off, press the [SOURCE] button either
shorter to select another mode or longer to turn the
power off.
2 .
Tap the [
BND
] button to switch to the
desired FM or AM bands.
[BND
] button
: Switch the FM band.
Pressing the button repeatedly
switches the FM band in the order of
FM1 → FM2....
switches the FM band in the order of
FM1 → FM2....
[BND
] button: Switch the AM band.
Pressing the button repeatedly
switches the AM band in the order of
AM1 → AM2....
switches the AM band in the order of
AM1 → AM2....
It is also possible to change the numbers of FM and AM
bands in a certain combination of them (See Page 56).
bands in a certain combination of them (See Page 56).
3 .
Press the [
TU
] button to tune to a station.
A tap on either the [
TU
] button for less than one
second will enable manual station tuning. Hold one
button down for more than two seconds to start the
automatic station search.
button down for more than two seconds to start the
automatic station search.
[TU
] button: Starts searching toward higher
frequencies.
[TU
] button: Starts searching toward lower
frequencies.
If stations have been stored in memory, pressing a button
from [1] to [6] will directly select a station. (Refer to the
section “Manually setting stations into memory” on page
48.)
from [1] to [6] will directly select a station. (Refer to the
section “Manually setting stations into memory” on page
48.)