Справочник Пользователя для Eclipse - Fujitsu Ten CD5441
47
How to operate the tuner
[ BND ] button
[ TU ]
button
button
2 .
Press the [
TU
] button to tune to a station.
Tap the [
TU
] button for less than one second to
tune to a station manually.
To start searching for a station automatically, hold the
button down for more than one second.
To start searching for a station automatically, hold the
button down for more than one second.
[TU
] button: Tunes to higher frequencies.
[TU
] button: Tunes to lower frequencies.
At times, it may be difficult to maintain optimum reception
because the antenna affixed to your vehicle is in motion
constantly (relative to the broadcast antenna), encountering
continuous variation in the received radio signals’ strength.
Other factors affecting reception include interference from
natural obstacles, sign posts, etc.
because the antenna affixed to your vehicle is in motion
constantly (relative to the broadcast antenna), encountering
continuous variation in the received radio signals’ strength.
Other factors affecting reception include interference from
natural obstacles, sign posts, etc.
■ Entering stations into memory automatically
(The automatic preset mode: ASM)
1 .
Tap the [
BND
] button to switch to the
desired FM or AM bands.
[BND
] button
: Switch the FM band.
Pressing the button repeatedly
switches the FM band in the order of
FM1 → FM2....
switches the FM band in the order of
FM1 → FM2....
[BND
] button: Switch the AM band.
Pressing the button repeatedly
switches the AM band in the order of
AM1 → AM2....
switches the AM band in the order of
AM1 → AM2....
It is also possible to change the numbers of FM and AM
bands in a certain combination of them (See Page 56).
bands in a certain combination of them (See Page 56).