Справочник Пользователя для JVC KD-AR7500

49

ENGLISH

•  Sound cannot be heard 

from the speakers.

The volume level is set to the 
minimum level.

Adjust it to the optimum 
level.

Connections are incorrect.

Check the cords and 
connections.

•  The receiver does not work 

at all.

The built-in microcomputer 
may have functioned 
incorrectly due to noise, etc.

Reset the receiver (see page 
2).

•  “Connect Error” appears on 

the display.

The control panel is not 
attached correctly.

Remove the control panel, 
wipe the connector, then 
attach it again (see pages 37 
and 44).

•  “Push Reset” appears on 

the display and the control 
panel movement is freezed.

Something is blocking the 
control panel movement.

Reset the receiver (see page 
2). If this does not work, 
check the installation.

•  SSM automatic presetting 

does not work.

Signals are too weak.

Store stations manually.

•  Static noise while listening 

to the radio.

The antenna is not connected 
firmly.

Connect the antenna firmly.

•  CD-R/CD-RW cannot be 

played back.

•  Tracks on the CD-R/

CD-RW cannot be skipped.

CD-R/CD-RW is not 
finalized.

•  Insert a finalized CD-R/

CD-RW.

•  Finalize the CD-R/CD-RW 

with the component which 
you used for recording.

•  Disc cannot be ejected.

Disc is locked.

Unlock the disc (see page 19).

•  Disc cannot be recognized 

(“No Disc,” “Loading 
Error,” or “Eject Error” 
flashes).

The CD player may have 
functioned incorrectly.

Eject the disc forcibly (see 
page 4).

•  Disc sound is sometimes 

interrupted.

You are driving on rough 
roads.

Stop playback while driving 
on rough roads.

Disc is scratched.

Change the disc.

Connections are incorrect.

Check the cords and 
connections.

What appears to be trouble is not always serious. Check the following points before calling a service 
center.

EN49-53_KD-AR7500[J]7.indd   49

EN49-53_KD-AR7500[J]7.indd   49

05.2.10   7:16:26 PM

05.2.10   7:16:26 PM