Справочник Пользователя для Kenwood KDC-PS907
English
29
The balance of the non-fading sound cannot be adjusted.
NOTE
Table of Audio Control Setting
Bass
(“BAS”)
(“BAS”)
Treble
(“TRE”)
(“TRE”)
Balance
(“BAL”)
(“BAL”)
Fader
(“FAD”)
(“FAD”)
Non-Fading
Preout Level
(“NF”)
Preout Level
(“NF”)
Bass decreased.
Treble decreased.
Left channel
emphasized.
emphasized.
Rear channel
increased.
increased.
Non-fading sound is
reduced.
reduced.
Bass increased.
Treble increased.
Front channel
increased.
increased.
Non-fading sound
emphasized.
emphasized.
Right channel
emphasized.
emphasized.
Adjustment
mode
(Display)
mode
(Display)
4 button
¢ button
Operation of Audio control button
Balanced
monaural
preout level
(“SUB”)
monaural
preout level
(“SUB”)
Monaural sound is
reduced.
reduced.
Monaural sound
emphasized.
emphasized.
Clock Display
Display the time.
Switching to Time Display:
Keep pressing the CLK button until the clock is displayed.
Adjusting Time
You can adjust the time manually. Also, with the automatic
time adjustment function set at ON, you can set the clock time
automatically according to time data sent from RBDS stations
(after receiving RBDS signals for several minutes). The factory
default is manual time adjustment.
time adjustment function set at ON, you can set the clock time
automatically according to time data sent from RBDS stations
(after receiving RBDS signals for several minutes). The factory
default is manual time adjustment.
Adjusting Time Manually:
When the time is not displayed, first press the CLK button to
display the time.
display the time.
While holding down the CLK button, press the
4 or ¢
buttons to adjust the time.
The
The
4 button adjusts the hour and the ¢ button adjusts
the minutes.
Do not press the CLK button for two seconds or more, as it will
change to the name preset mode.
Press the
change to the name preset mode.
Press the
4 or ¢ button quickly to adjust the clock.
Turning Automatic Time Adjustment On/Off:
Press the TUN button repeatedly and switch the display to
"ALL OFF" to enter the standby mode.
"ALL OFF" to enter the standby mode.
Press the #1 button for at least three seconds.
Each time you press the button, the automatic time
adjustment function switches on and off.
"SYNC ON" (automatic time adjustment is on.)
"SYNC OFF" (automatic time adjustment is off.)
Each time you press the button, the automatic time
adjustment function switches on and off.
"SYNC ON" (automatic time adjustment is on.)
"SYNC OFF" (automatic time adjustment is off.)
Adjusting Time Automatically:
Tune to a RBDS station and receive the signal for several
minutes.
The clock will adjust automatically to the local time.
minutes.
The clock will adjust automatically to the local time.
The clock will not adjust automatically if the RBDS station tuned
to is not transmitting time data. In such a case, try another
RBDS station.
to is not transmitting time data. In such a case, try another
RBDS station.
NOTE
2
1
NOTE
2
1