Справочник Пользователя для Kenwood DPX500BT

English   |   9

•  Mount the unit so that the mounting angle is 30° 

or less.

•  Reception may become poor if there are metal 

objects near the Bluetooth antenna. (DPX500BT only) 

To assure good reception, note the following:
•  Communicate with the cell-phone within the line-

of-sight distance of 10 m (30 ft). The communication 
range becomes shorter depending on the 
surrounding environment. The communication 
range also becomes shorter when there is an 
obstacle between this unit and the cell-phone. The 
above maximum communication range (10 m) is not 
always assured. 

•  A broadcast station or walkie-talkie located nearby 

can interfere with communication due to a too 
strong signal. 

!

Install this unit in the console of your vehicle. 
Do not touch the metal parts of this unit during and 
shortly after use of the unit. Metal parts such as the 
heat sink and enclosure become hot. 

Check the installation position of the microphone 
(Accessory 7).

Remove oil and other dirt from the installation 
surface.

Install the microphone. 

Lay the cable up to the unit with it secured at 
several positions using tape or the like.

⁄

•  Install the microphone as far as possible from the 

cell-phone.

Peel off the release coated 
paper of double-face adhe-
sive tape to secure the 
microphone on the place 
shown above.

Adjust the direction of the 
microphone to the driver.

Fix a cable with a commercial item of tape.

Accessory 7

DPX500BT only

B59-2162-00_00_13-2DIN_QSG_K_en.indd   9

12/11/21   14:42