Справочник Пользователя для Kenwood DNX6040EX

Return to the Top page

Audio Setting Up

Car type adjust

You can manually set the sound output

timing of each channel.

In the Car Type screen, touch [Adjust].

Car Type Adjust screen appears.

Touch the speaker you wish to adjust

and set a delay time using [

2] and [3]

or slider bar.

NOTE

• Make fine adjustment of the delay time of the

speaker output specified here to have a more
suitable environment for your vehicle.

• The settings of the delay time are automatically

identified and compensated by specifying the
distances of each speaker from the center of the
vehicle interior.
1

Set the front and rear positions and the height

of the reference point to the position of the
ears of the person sitting in the front seat, and
set the right and left positions to the center of
the vehicle interior.

Measure the distances from the reference

point to the speakers.

Calculate the distance difference in accordance

with the farthest speaker.

1.6feet

2.5feet

5feet

+2.5feet

+0feet

+3.4feet

DSP select

You can select whether using DSP (Digital

Signal Processor) System.

Touch [Bypass] or [Through] of [DSP

Select] in the Audio SETUP screen.

Bypass
There is no effect by DSP.
Through
There is an effect by DSP.

NOTE

• When the mode is set to [Bypass], DSP System

cannot be adjusted.

Controlling General Audio

Touch [Audio Control].