Справочник Пользователя для Kenwood DPX 504 U
English
|
45
Demonstration mode Setting
Turning the demonstration mode ON/OFF.
1
Enter Function setting mode
Press the [VOL] knob.
Press the [VOL] knob.
2
Enter Demonstration mode setting
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “DEMO Mode”/ “DEMO MODE”.
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “DEMO Mode”/ “DEMO MODE”.
3
Set the Demonstration mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “ON” or “OFF”.
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “ON” or “OFF”.
4
Exit Function setting mode
Press the [ ] button for at least 1 second.
Press the [ ] button for at least 1 second.
Muting volume upon reception of
Phone call
Phone call
The audio system automatically mutes upon
reception of an incoming call.
reception of an incoming call.
When a call comes in
“CALL” is displayed.
The audio system pauses.
The audio system pauses.
Listening to the audio during a call
Press the [SRC] button.
The “CALL” display disappears and the audio system
comes back ON.
The “CALL” display disappears and the audio system
comes back ON.
When the call ends
Hang up the phone.
The “CALL” display disappears and the audio system
comes back ON.
The “CALL” display disappears and the audio system
comes back ON.
⁄
•
To use the TEL Mute feature, you need to hook up the MUTE
wire to your telephone using a commercial telephone
accessory. Refer to <Connecting Wires to Terminals> (page
10) of Quick start guide.
wire to your telephone using a commercial telephone
accessory. Refer to <Connecting Wires to Terminals> (page
10) of Quick start guide.