Справочник Пользователя для Blaupunkt CD52 7 642 285 310
14
➮
Keep pressing the button
:
un-
til “HICUT” appears in the display.
➮
Press the or button
:
to ad-
just HICUT.
“HICUT 0” means that no reduction will
be made, “HICUT 3” means a maximum
automatic reduction of the treble and
interference level will be applied.
be made, “HICUT 3” means a maximum
automatic reduction of the treble and
interference level will be applied.
➮
Press the MENU button
8
or OK
;
.
Switching bandwidth during
interference (SHARX)
interference (SHARX)
The SHARX function allows you to
largely avoid interference caused by
neighbouring radio stations (FM only).
Switch on the SHARX function if you
experience a high radio station density.
largely avoid interference caused by
neighbouring radio stations (FM only).
Switch on the SHARX function if you
experience a high radio station density.
Switching SHARX on/off
➮
Press the MENU button
8
.
➮
Keep pressing the button
:
until “SHARX” appears in the dis-
play.
play.
➮
Press the or button
:
to
switch SHARX on/off.
“SHARX OFF” means automatic band-
width switching is deactivated, “SHARX
ON” means it is activated.
width switching is deactivated, “SHARX
ON” means it is activated.
➮
Press the MENU button
8
or OK
;
.
Displaying scrolling text
Some radio stations use the RDS sig-
nal to transmit advertising or other in-
formation instead of their station name.
These scrolling texts appear in the dis-
play.
nal to transmit advertising or other in-
formation instead of their station name.
These scrolling texts appear in the dis-
play.
You can deactivate the “scrolling text”
display for stations that you have stored
on the station buttons.
display for stations that you have stored
on the station buttons.
➮
Keep the RDS button
4
pressed
until “NAME FIX” appears in the
display.
display.
➮
To allow scrolling texts to appear in
the display again, keep the RDS
button
the display again, keep the RDS
button
4
pressed until “NAME
VAR” appears in the display.
Note:
If you tune into an already stored sta-
tion using a different means (e.g. using
SCAN or by searching), the “scrolling
texts” will be displayed.
If you tune into an already stored sta-
tion using a different means (e.g. using
SCAN or by searching), the “scrolling
texts” will be displayed.
Setting the display
When in radio mode, you have the op-
tion of continuously displaying the time
or continuously displaying the station
name or frequency.
tion of continuously displaying the time
or continuously displaying the station
name or frequency.
➮
Keep the DIS
button
7
pressed until the required display
appears.
appears.
RADIO MODE