Инструкции Пользователя для Alpine SPX-137R
10
Tweeter: Swivel-flush mount
Installation (SPX-107R, SPX-137R, SPX-177R)
Haut-parleur d’aiguës : Montage pivotant à niveau
Installation (SPX-107R, SPX-137R, SPX-177R)
st4.2x9,5mm
Notes:
l
Before mounting, insert swivel retention cup into housing. Then rotate until achieving a
positive lock using an appropriate tool (screwdriver, etc.).
positive lock using an appropriate tool (screwdriver, etc.).
l
Mount complete swivel-flush cup with mounting clips first trough opening (Fig. 1).
l
Press mounting clips at center and secure with screw (Fig. 2).
l
Lock swivel ring to tweeter housing and make connections, then insert tweeter (terminals
first) into swivel-flush cup (Fig. 3).
first) into swivel-flush cup (Fig. 3).
l
Fit tweeter into cup by rotating tweeter while pressing down (Fig. 4), then adjust for optimum
listening angle.
listening angle.
Caution:
l
If custom painting is desired, remove grille by carefully pulling on mesh to release glue
without damaging diaphragm.
without damaging diaphragm.
st4,2x9,5mm
Remarques :
l
Avant de procéder au montage, insérez l’embase de maintien pivotante dans le boîtier.
Tournez jusqu’à fermeture complète en utilisant un outil approprié (tournevis etc.).
Tournez jusqu’à fermeture complète en utilisant un outil approprié (tournevis etc.).
l
Insérez l’embase pivotante à niveau en faisant tout d’abord passer les attaches à travers
l’ouverture (Fig. 1).
l’ouverture (Fig. 1).
l
Appuyez sur les attaches au centre et fixez à l’aide d’une vis (Fig. 2).
l
Fixez le collier pivotant sur le boîtier du haut-parleur et procédez aux connexions. Insérez
ensuite le haut-parleur (bornes en premier lieu) dans l’embase pivotante en surface (Fig. 3).
ensuite le haut-parleur (bornes en premier lieu) dans l’embase pivotante en surface (Fig. 3).
l
Ajustez le haut-parleur dans l’embase en le tourmant tout en appuyant (Fig. 4). Ajustez ensuite
l’installation pour obtenir un angle d’écoute optimal.
l’installation pour obtenir un angle d’écoute optimal.
Attention :
l
Si vous souhaitez une couleur personnalisée, enlevez la grille en tirant prudemment
sur les mailes afin de libérer la colle sans endommager la membrane.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 1
Fig. 2
Fig. 3
Fig. 4