Справочник Пользователя для Novatel DL-V3
DL-V3 User Manual Rev 3
89
B.4
CURRENTFILE
Specify File for
FILEHDR/FILETRANSER
Logs
The currentfile command allows you to specify a file to which subsequent requests for filehdr and
filetransfer logs apply, see Pages 158-160.
filetransfer logs apply, see Pages 158-160.
Specified without arguments, the currentfile command clears any previously configured currentfile
settings. The currentfile file command:
settings. The currentfile file command:
•
Configures the currentfile to file. File is a name of a file on the CF card specified in a base.ext
format, where base is a maximum of 8 characters and the optional ext is a maximum of 3
characters. Subsequent requests for the filehdr log, see Page 158, displays the filehdr log read
from file or for the filetransfer log, see Page 160, transfers file in filetransfer log packets.
format, where base is a maximum of 8 characters and the optional ext is a maximum of 3
characters. Subsequent requests for the filehdr log, see Page 158, displays the filehdr log read
from file or for the filetransfer log, see Page 160, transfers file in filetransfer log packets.
•
Causes the receiver to transfer the entire file on all subsequent requests for the filetransfer log
when issued with the dump mode specified as all.
when issued with the dump mode specified as all.
•
Causes the receiver to transfer only file packet number packet_id on all subsequent requests for
the filetransfer log when issued with the transfer mode specified as {single [packet_id]}.
Packet_id ranges from 0 to SizePackets-1, see the dirent log on Page 154. The first packet is
numbered 0. Packet size is defined in the file log definition.
the filetransfer log when issued with the transfer mode specified as {single [packet_id]}.
Packet_id ranges from 0 to SizePackets-1, see the dirent log on Page 154. The first packet is
numbered 0. Packet size is defined in the file log definition.
•
Defaults the dump mode to all when issued without specifying the dump mode.
Syntax
currentfile
currentfile file [all|{single [packet_id]}]
Message ID = 185
Table 19: Dump Mode
Table 20: CURRENTFILE Default Configuration
Field
Data
Value Used if
Not Specified
Bytes
Format
Units
Offset
1
Header
-
-
-
0
2
File
-
12
Char[]
none
H
3
Dump Mode, see Table 19
ALL
4
Enum
none
H+12
4
Packet ID
0
4
Ulong
none
H+16
Binary Value
ASCII Value
Description
0
ALL
Send all packets on dump
1
SINGLE
Send single packet on dump
Parameter
Power-On
Freset
Stored in NVM
currentfile
none
none
NO