Справочник Пользователя для Hifionics HS500.4

Basic application

Interconnect cable checklist:

Crossover frequency control checklist:

Connect the inputs to a suitable source, e.g. a head unit with good quality RCA cables.

LOW PASS: 40Hz to 150Hz

Connect the LINE OUT to the inputs of the system highs amplifier.

SUBSONIC:15 Hz to 55 Hz
BASS EQ: 0 to +12dB

Use at least #12 gauge speaker wiring. The amps have dual speaker terminals,
simplifying the hookup of multiple speakers. These amps are mono, 1 channel, amplifiers

Level control checklist:

which have multiple positive and negative connections for ease of wiring. The 2 positives

Refer to the section “Setting up systems after installation for best performance”

are the same internally and the 2 negatives are the same internally.

Minimum final loudspeaker impedance: 1-Ohm.

FULL RANGE

STEREO LINE INPUT

NOT USED

Y-ADAPTOR

Note: You can use the Radio/CD designated mono line output or a full range stereo line output.
For full range stereo line output, you will need an optional “Y-Adaptor” as shown.

HS1500.1D / HS2500.1D MONO AMPLIFIER APPLICATION

PARALLEL MONO

SUBWOOFERS

2-OHMS EACH MINIMUM

DESIGNATED

MONO OUTPUT

FROM HEAD UNIT

HS1500.1D / HS2500.1D

N MAXX

BOOST

POWER INPUT

GND REM BA

TT+12V

SPEAKER OUTPUT

+ + - -

FUSE

SUBWOOFER

REMOTE TURN-ON

CHASSIS GROUND

TO BATTERY +12v
VIA FUSE

HFR-4