Справочник Пользователя для Insignia NS-39D240A13
11
Insignia 39" LED TV
www.insigniaproducts.com
Using composite video (good)
To connect a cable or satellite box using
composite video:
composite video:
1 Make sure that your TV’s power cord is
unplugged, and all connected equipment is
turned off.
turned off.
2 Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
box.
3 Connect an AV cable (not provided) to the
COMPONENT/AV Y/VIDEO jack and L and R
audio jacks on the back of your TV and to the
composite video and audio out jacks on the
cable or satellite box.
audio jacks on the back of your TV and to the
composite video and audio out jacks on the
cable or satellite box.
4 Plug your TV’s power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite box.
satellite box.
5 Go through the Setup Wizard on page
.
Using coaxial (good)
To connect a cable or satellite box using coaxial:
1 Make sure that your TV’s power cord is
unplugged, and all connected equipment is
turned off.
turned off.
2 Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
box.
3 Connect a coaxial cable (not provided) to the
ANT/CABLE jack on the back of your TV and to
the coaxial out jack on the cable or satellite box.
the coaxial out jack on the cable or satellite box.
4 Plug your TV’s power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite box.
satellite box.
5 Go through the Setup Wizard on page
.
Note
•
The COMPONENT/AV Y/VIDEO, P
B
, and P
R
video jacks (used to connect a component
device) share the L and R audio jacks with the
COMPONENT/AV Y/VIDEO jack (used to
connect a composite device).
device) share the L and R audio jacks with the
COMPONENT/AV Y/VIDEO jack (used to
connect a composite device).
•
When you connect the audio using the L and R
audio jacks, the audio output is analog.
audio jacks, the audio output is analog.
Y / VIDEO
Cable or satellite box
AV cable
Cables are often color-coded to match color-coded jacks.
Note: The yellow video connector on the AV cable
connects to the green COMPONENT/AV Y/VIDEO jack.
Note: The yellow video connector on the AV cable
connects to the green COMPONENT/AV Y/VIDEO jack.
Back of TV
Notes
•
Use a coaxial cable to eliminate interference and
noise from radio waves.
noise from radio waves.
•
Do not bundle the coaxial cable with the power
cord or other cables.
cord or other cables.
Y / VIDEO
Cable or satellite box
Coaxial cable
Back of TV