Справочник Пользователя для Panasonic SC-MAX770
VQ
T5
K
75
12
30 FM and 15 AM stations can be preset.
1
Press [OK] to select “LOWEST” or “CURRENT”
frequency.
frequency.
2
Press [PLAY MENU] to select “A.PRESET” and
then press [OK].
“START?” is shown.
then press [OK].
“START?” is shown.
3
Press [OK] to start presetting.
To cancel, press [∫].
To cancel, press [∫].
1
Press [6] or [5] to tune in to the station.
2
Press [PROGRAM].
3
Press the alphanumeric buttons to select a
preset number.
Do steps 1 through 3 again to preset more stations.
The new station replaces any station that occupies
the same preset number.
preset number.
Do steps 1 through 3 again to preset more stations.
The new station replaces any station that occupies
the same preset number.
Press the alphanumeric buttons, [:] or [9] to
select the preset station.
Using the main unit
select the preset station.
Using the main unit
1
Press [TUNE MODE] to select “PRESET”.
2
Press [:/6] or [5/9] to select the preset
station.
station.
By main unit only
This system can also receive AM broadcasts allocated in
10 kHz steps.
This system can also receive AM broadcasts allocated in
10 kHz steps.
1
Press [RADIO/EXT-IN] to select “FM” or “AM”.
2
Press and hold [RADIO/EXT-IN].
After a few seconds, the display panel shows the current
minimum radio frequency. Release the button when the
minimum frequency changes.
• To go back to the initial setting, do the above steps
minimum radio frequency. Release the button when the
minimum frequency changes.
• To go back to the initial setting, do the above steps
again.
• After you change the setting, preset frequencies are
erased.
Bluetooth
®
You can connect and play an audio device wirelessly
through Bluetooth
through Bluetooth
®
.
• Refer to the operating instructions of the Bluetooth
®
device for details.
• If you intend to use an NFC (Near Field
Communication)-compatible Bluetooth
®
device, proceed
to “One-Touch Connection (Connecting by NFC)”.
• Decrease the volume before connect the Bluetooth
®
device.
Preparation
• Turn on the Bluetooth
• Turn on the Bluetooth
®
feature of the device and place
the device near this unit.
1
Press and hold [ /MEMORY,-PAIRING] on main unit.
2
Select “SC-MAX770” from the Bluetooth
®
menu
of the device.
The device connects with this system automatically
after pairing is complete.
The device connects with this system automatically
after pairing is complete.
3
Start playback on the Bluetooth
®
device.
For other operations on main unit, refer to “Playing disc”.
Note:
• You can also operate with the remote control.
1 Press [ , MEMORY] to select “BLUETOOTH”.
2 Press [PLAY MENU] to select “PAIRING”.
3 Press [2, 1] to select “OK? YES” and then press [OK].
4 Select “SC-MAX770” from the Bluetooth
2 Press [PLAY MENU] to select “PAIRING”.
3 Press [2, 1] to select “OK? YES” and then press [OK].
4 Select “SC-MAX770” from the Bluetooth
®
menu of the device.
• If prompted for a passkey, input “0000”.
• A device must be paired to connect.
• You can register up to 8 devices with this unit. If a 9th
• A device must be paired to connect.
• You can register up to 8 devices with this unit. If a 9th
device is paired, the device that has not been used for the
longest time will be replaced.
longest time will be replaced.
• This system can only connect to one device at a time.
• When “BLUETOOTH” is selected as the source, this
• When “BLUETOOTH” is selected as the source, this
system will automatically try and connect to the last
connected device.
connected device.
Memory presetting
Automatic presetting
Manual presetting
Selecting a preset station
AM allocation setting
Pairing a device
SC-MAX770PU_eng.book 12 ページ ２０１４年３月６日 木曜日 午後２時５４分