Справочник Пользователя для Marantz NA-11S1

18

This unit is equipped with a sound quality adjusting function 

which allows users to enjoy the desired playback sound quality.

• This setting remains effective even if the power is turned off.

Digital feedback is used to improve the low-sound linearity and 

the noise characteristics of the audible band.

Although no difference is observed in the measured values, 

the sound quality is changed, allowing users to specify a 

favorite sound quality.

Turns on the Menu settings mode 

and the Menu appears on the 

display (

ui

p

“Noise Shaper” menu appears.

ui

p

The setting is entered.

The Noise Shaper function is disabled during playback of a 32 

kHz sampling frequency source and DSD.

This filter is effective in preventing excessive speaker vibration 

when playing music source where audio with extremely low 

noise characteristics has been recorded. (The cut frequency is 

set at 1.7 Hz.)

Turns on the Menu settings mode 

and the Menu appears on the 

display (

ui

p

“DC Filter” menu appears.

ui

p

The setting is entered.

• The DC Filter function is disabled during playback of a 32 kHz 

sampling frequency source and DSD.

• The “Noise Shaper”, “DC Filter” and filter characteristics 

have a last memory function. These settings remain in 

memory even if the power is turned off.

Turns on the Menu settings mode 

and the Menu appears on the 

display (

ui

p

“Digital Out” menu appears.

ui

p

• When “Digital Out” is set to “Off”, the digital out off  

indicator lights on the display.