Справочник Пользователя для Panasonic CQ-C500U
CQ-C500U
12
Source Selection
(SOURCE)
The source changes as follows every time [SOURCE]
is pressed.
is pressed.
AUX1 (AUX1 in) (3.5 mm stereo)
From line output of external sound/audio device (ex.
Silicon-audio player, HDD player, etc.)
Silicon-audio player, HDD player, etc.)
General
Volume Off (down)
Press
[MUTE].
Cancel
Press
[MUTE] again.
Note: You can select mute or attenuation. (
page 23)
Up
Down
Down
Setting Range: 0 to 40
Default: 18
Default: 18
Note: The volume level can be set independently for
each source. (For radio, one volume setting for AM, one
volume setting for all FMs)
each source. (For radio, one volume setting for AM, one
volume setting for all FMs)
Volume
Adjustment
(VOLUME)
Temporar
y V
olume Off
(Down)
MUTE (A
TT
: Attenuation)
Caution
• Set the volume level to low enough before the
AUX connection is completed.
Failure to observe this, the loud noise may come
out and damage your speakers and your hearing.
Radio
FM1, FM2, FM3, AM (
page 14)
Player
When loading CD (
page 16)
When loading MP3/WMA/AAC disc (
page 18)
AUX1
Device connected to the AUX1 terminal of this unit
When an optional device is connected:
Shift to connected device
When connecting CD changer
Shift to connected device
When connecting CD changer
When connecting iPod
When connecting XM Receiver
When connecting Sirius Receiver
OR
When an expansion module is connected:
The devices connected to the ports 1 to 4 are
activated in sequence after shifting to AUX2 (device
connected to the AUX terminal of the expansion
module).
The devices connected to the ports 1 to 4 are
activated in sequence after shifting to AUX2 (device
connected to the AUX terminal of the expansion
module).
Note: For information about connectable devices, refer
to the System Upgrade Guidebook or the instruction
manual for each device.
to the System Upgrade Guidebook or the instruction
manual for each device.
System-up Connector