Справочник Пользователя для Panasonic CQ-C1300U

Скачать
Страница из 21
46
CQ-C1300U
CQ-C1300U
47
CD.C-IN
Electrical Connections 
(continued)
Upgrading the System 
Example combination
 CD changer (CX-DP880U, option) 
CD changer input cord
R (red)
CD changer control 
connector
RCA cord (R)
RCA cord (L)
DIN cord
E
N
G
L
I
S
H
33
E
N
G
L
I
S
H
34
L (white)
Note:
≥  You cannot connect 2 CD changers using the dual 
CD changer selector (CA-CD55U, option).
 For wiring, carefully read the operating 
instructions for the devices connected.
CD changer 
(CX-DP880U, option)
Extension cord
(supplied with CX-DP880U)
Speaker System Connection
Example combination
≥ Stereo power amplifi er (option)
≥ Front speaker, rear speaker (option)
Stereo power amplifi er 
(option)
(bridged connection)
Rear speaker (option)
RCA cord
 
(option)
Front speaker (option)
External amplifi er 
control power lead
(Blue/white stripe)
Pre-amp output connector (rear)
Pre-amp output connector (front)
L (white)
R (red)
Note:
 For wiring, carefully read the operating 
instructions for the devices connected.
FM Stereo Radio
Frequency range: 
87.9 MHz–107.9 MHz
Usable sensitivity: 
10.2 dBf. (0.9 
¨V, 75 ≠)
50 dB quieting sensitivity: 15.2 dBf. (1.6 
¨V, 75 ≠)
Frequency response: 
30 Hz–15 kHz (
d3 dB)
Alternate channel selectivity: 75  dB
Stereo separation: 
35 dB (1 kHz)
Image response ratio: 
75 dB
IF response ratio: 
100 dB 
Signal to noise ratio: 
62 dB
AM Radio
Frequency range: 
530 kHz–1 710 kHz
Usable sensitivity: 
27 dB/
¨V 
(11 V, S/N 20 dB)
CD Player
Sampling frequency: 
8 times oversampling
DA converter: 
4 DAC system
Pick-up type: 
Astigma 3-beam
Light source: 
Semiconductor laser
Wave length: 
780 nm
Frequency response: 
20 Hz–20 kHz (
d1 dB)
Signal to noise ratio: 
96 dB
Total harmonic distortion:  0.01 % (1 kHz)
Wow and fl utter: 
Below measurable limits
Channel separation: 
75 dB
General
Power supply: 
DC 12 V (11 V–16 V), 
test voltage 14.4 V, 
negative ground
Current consumption: 
Less than 2.2 A 
(CD mode; 
0.5 W 4-speaker)
Maximum power output:  50 W
k4 (at 1 kHz) 
volume control maximum
Tone adjustment range:  Bass: 
d12 dB at 100 Hz
Treble: 
d12 dB at 10 kHz
Speaker impedance: 
4–8 
Pre-amp output voltage:   2.5 V 
(CD mode; 1 kHz, 0 dB)
Pre-amp output impedance: 200 
Dimensions (W
kHkD): 7qk1
15
/
16
qk6
1
/
8
(178
k50k155 mm)
Weight: 
3 lbs. 1 oz (1.4 k )
Above specifi cations comply with EIA standards.
Note:
  Specifi cations and design are subject to modifi cation without notice due to improvements.
Specifi cations
Remove the vinyl cap.