Руководство По Работе для ONKYO TX-SR602E
26
Connecting the AV receiver
—Continued
By connecting both the audio and video outputs of your DVD player and other AV components to the AV receiver, you
can select both the audio and video simultaneously simply by selecting the appropriate input source on the AV receiver.
can select both the audio and video simultaneously simply by selecting the appropriate input source on the AV receiver.
The AV receiver supports several connection formats for compatibility with a wide range of AV equipment. The format
you choose will depend on the formats supported by your other components. Use the following sections as a guide.
For video components, you must make two connections—one for audio, one for video.
you choose will depend on the formats supported by your other components. Use the following sections as a guide.
For video components, you must make two connections—one for audio, one for video.
Video Connection Formats
Video equipment can be connected to the AV receiver by
using any one of the following video connection formats:
composite video, S-Video, or component video, the
latter offering the best picture quality.
A video signal connected to a V or S IN jack will be con-
verted—composite video to S-Video or S-Video to com-
posite video—but only for the MONITOR OUT jacks,
not the VIDEO 1 and VIDEO 2 OUT V and S jacks.
using any one of the following video connection formats:
composite video, S-Video, or component video, the
latter offering the best picture quality.
A video signal connected to a V or S IN jack will be con-
verted—composite video to S-Video or S-Video to com-
posite video—but only for the MONITOR OUT jacks,
not the VIDEO 1 and VIDEO 2 OUT V and S jacks.
Note:
The TX-SR702/702E, TX-SR602E, and Austra-
lian TX-SR602 can be set to upconvert composite video
and S-Video input signals and output them from the
COMPONENT VIDEO OUT (see page 43).
and S-Video input signals and output them from the
COMPONENT VIDEO OUT (see page 43).
Audio Connection Formats
Audio equipment can be connected to the AV receiver by
using any of the following audio connection formats:
analog, optical, coaxial, or multichannel.
When choosing a connection format, bear in mind that
the AV receiver doesn’t convert between them. For
example, audio signals connected to an OPTICAL or
COAXIAL input are not output by the analog TAPE
OUT.
using any of the following audio connection formats:
analog, optical, coaxial, or multichannel.
When choosing a connection format, bear in mind that
the AV receiver doesn’t convert between them. For
example, audio signals connected to an OPTICAL or
COAXIAL input are not output by the analog TAPE
OUT.
Connecting Both Audio & Video
: Signal Flow
Video
Audio
Video
Audio
Speakers (see page 23 for connection infor-
mation)
mation)
DVD player, etc.
TV, projector,
etc.
etc.
Which Connections Should I Use?
DVD player,
etc.
AV Receiver
TV, pro-
jector,
etc.
Composite
Output
IN
MONITOR OUT
Input
Composite
Composite
Composite
S-Video
S-Video
S-Video
S-Video
Component
Component
Component
Component
page 43
*
*
TX-SR702/702E, 602E and
Australian TX-SR602 only
DVD player,
etc.
AV Receiver
MD recorder,
etc.
Optical
Output
IN
OUT
Input
Optical
Optical
Coaxial
Coaxial
Coaxial
*
*
TX-SR702/702E only
Analog
Analog
Analog
Multi-
channel
channel
Multi-
channel
channel
Only front
left and
right
left and
right
Optical
Coaxial
Analog
TX-NR702,602_En.book Page 26 Tuesday, September 7, 2004 1:18 PM