Справочник Пользователя для D-Link DCS5020L

This is the domain name or IP address of your external e-mail server.

This allows you to set the port for the SMTP Server. The default value is 25, 

and should only be changed if advised by your e-mail provider.

This is the e-mail address listed as the sender for your notification e-mails.

This is the e-mail address that your notification e-mails will be sent to.

If the SMTP server uses authentication, enter your user name.

If the SMTP server uses authentication, enter your password.

This section allows you to configure your camera to send snapshots and video clips to an e-mail address. If you are not sure what settings to use, 

check with your e-mail service provider.

For example, if you want to use Gmail with SSL-TLS for e-mail notifications, 

you can follow the setup procedure as below:

Step 1 - Enter “smtp.gmail.com” in SMTP Server Address.

Step 2 - Change the SMTP server port number from 25 to 465.

Step 3 - Enter your gmail e-mail address in Sender E-mail Address.

Step 4 - Enter the destination e-mail address in Receiver E-mail Address.

Step 5 - Enter the user name required to access the SMTP server.

Step 6 - Enter the password required to access the SMTP server.

Step 7 - Select SSL-TLS and then click Save Settings.

Step 8 - Click the Test button to send a test e-mail to the account listed  

 

   above.