Справочник Пользователя для Faber M640

40  •  Operational Reference 

CamExpert provides controls to configure acquisitions via the Image Buffer and ROI Parameters tab. The image 
buffer can be easily cropped as desired. Below is the CamExpert dialog and parameter descriptions follow.  

 

 

 

 

Pixel Format 

For the Genie Monochrome series, the image buffer format is Monochrome 8-bit or 10-bit. 

Width (in Pixels) 

Displays the image buffer width (X axis), in pixels. 

Height (in Pixels) 

Displays the image buffer height (Y axis), in pixels. 

OffsetX (in Pixels) 

Specifies the offset in X, from the left of the image, when using an ROI. The image buffer 
width is automatically adjusted to compensate for this offset. 

OffsetY (in Lines) 

Specifies the offset in Y, from the top of the image, when using an ROI. The image buffer 
height is automatically adjusted to compensate for this offset. 

Image Flip 

Enables hardware based horizontal image flip. 

 

 

Note: When operating in binning mode, the resolution is halved and the coordinate system is scaled accordingly. 
For instance, an OffsetX of 20 pixels at nominal resolution is equivalent to an OffsetX of 10 pixels with 
horizontal binning enabled.