Справочник Пользователя для Faber M640

Network Tools  •  79 

The Network Configuration tool provides information on all network adapters installed in the system and any 
connected GigE Vision devices. For the Genie, the tool allows a simple method to assign a User-Defined name and 
also to set a Persistent IP address instead of the default DHCP/LLA assigned IP address. Using this tool, Genie 
network configurations can be easily made without having to use any Windows Control Panel application. 

 

 

Important: Any changes made with this tool will update the Genie flash memory. Do not remove power from the 
Genie camera for a minimum 10 seconds. Then cycle the Genie power to load the new flash settings. 

 

•  Start the Network Configuration program from the windows start menu: Start•Programs•DALSA•Sapera 

Network Imaging Package•DALSA Network Configuration Tool.  

•  The left display window will show all installed network adapters and any connected Genie camera. 
•  Click on a Genie camera to see information such as MAC address, current IP address, serial and firmware 

numbers. 

•  Click in the User Defined Name edit box and change the Genie name as required. Click on the Update button to 

write into the Genie memory.  

 

 

•  Select the Device Configuration tab to switch from the default IP configuration mode DHCP/LLA to 

Persistent IP mode (only if required).  

•  With Persistent IP mode selected enter the desired IP address, subnet mask, and default gateway.  

Important: do not forget the persistent IP address you assign, else the camera can not be controlled.