Справочник Пользователя для Siemens CCIC1410

54 

Siemens Building Technologies

 

 

Fire Safety & Security Products 

 

05.2009

 
 

 

 

To access the network camera from the 
Internet, select this option to allow the network 
camera to open ports on the router 
automatically so that video streams can be 
sent out from a LAN. To utilize this feature, 
make sure that your router supports UPnP™ 
and it is activated. 

Select this option to configure your network camera to make it accessible 
from anywhere as long as there is an Internet connection. Note that to 
utilize this feature, it requires an account provided by your ISP. 

 

Proceed as follows to acquire your network camera’s public IP address. 

1. Set up the network camera in LAN. 

2. Go to Configuration > Application > Server Settings (please refer to 

Server Settings in chapter 9.13 Application settings) to add a new server 
-- email or FTP server. 

3. Go to Configuration > Application > Media Settings (please refer to 

Media Settings in chapter 9.13 Application settings). Select System log 
so that you will receive a list of system logs in TXT file format containing 
the network camera’s public IP address on your email or FTP server. 

4. Go to Configuration > Network > Network Type. Select PPPoE and enter 

the user name and password provided by your ISP. Click Save for your 
changes to take effect. 

5. The network camera starts to reboot. 

If the default ports are already used by other devices connecting to the 
same router, the network camera will select other ports. 

If UPnP™ is not supported by your router, you will see the following 
message: