Справочник Пользователя для Lucent Technologies Release 7
DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Commands
8-187
reset system
8
Parameters
Examples
reset system 1
reset system 4 tape contention-override
reset system 4 tape contention-override
Output
Once this command is entered, it may not be canceled. The screen will display
the results of various initialization tests. If the reset command is successful the
user will be logged off (except for reset system interchange). Several
the results of various initialization tests. If the reset command is successful the
user will be logged off (except for reset system interchange). Several
Level
Reset levels are numbered as shown in
Table 8-9
. The execution times listed
are approximations.
Table 8-9.
Approximate Recovery Time for System Resets (min:sec)
Level
Recovery
2,400 lines
5,000 lines
15,000 lines
Tape
Disk
Tape
Disk
Tape
Disk
1
Warm Restart
:10
:10
:10
:10
:10
:10
2
Cold-2
1:00
1:00
2:00
2:00
4:00
4:00
3
Cold-1
3:00
2:00
5:00
3:00
11:00
7:00
4
Reboot
12:00
4:00
15:00
6:30
23:00
11:00
5
Extended Reboot
15:00
7:00
18:00
10:00
25:00
15:00
Interchange
Health-override
Disk
Valid only for reset level 4, this specifies use of the boot
image stored on disk for the reboot. Disk is the default
device.
image stored on disk for the reboot. Disk is the default
device.
Tape
Valid only for reset level 4, this specifies use of the boot
image stored on tape for the reboot.
image stored on tape for the reboot.
Contention-override
Contention control aborts the reset system command if
any other command is currently running. The
contention-override option forces other processes to
abort, allowing the reset to proceed.
any other command is currently running. The
contention-override option forces other processes to
abort, allowing the reset to proceed.