Справочник Пользователя для Lucent Technologies Release 6

DEFINITY Enterprise Communications Server Release 6
Installation and Test for Multi-Carrier Cabinets

555-230-112

Issue 5

May 1998

Install Telecommunications Cabling

Page 2-14

Install Sneak Fuse Panels

Figure 2-7.

Model 507B Sneak Fuse Panel

1. Locate the 507B near the network interface or the MDF.

2. Hold the panel against the mounting surface and mark the mounting

screw locations. Drill pilot holes at the marked locations and partially
install a locally obtained #12 x 3/4-inch screw into the 2 bottom mounting
slots.

3. Slide the sneak fuse panel onto the mounting screws and tighten the

screws securely.

4. Install a locally obtained #12 x 3/4-inch screw into the top 2 mounting slots

and tighten securely.

5. Repeat the procedure for each sneak fuse panel.

Figure Notes:

1. Sneak Fuse Panel

2. 25-Pair Male Connector (In)

3. 25-Pair Female Connector (Out)

4. 220029 Fuses (Inside Panel). Use

Small Screwdriver to Pry Top Cover Off

Sneak

Current

Protector

507B

sneak CJL 032096